816-229-0804
AB: FLY menu
Categories

Build Parts

In Stock
Price
Sort by:
Popular First
Show:
20
Red Star Arms FCG pin retaining plate, dark heat-treated steel, side view.
Red Star Arms FCG Pin Retaining Plate
0.0
In Stock
$495
+ −
Original Red Star Arms retaining plate — heat-treated steel, installs in seconds, replaces wire retainer, fits most AKs.
AK-Builder Bulgarian-style center support sleeve and rivet for 1mm receivers, heat treated alloy steel.
AK Center Support for 1mm Receivers
0.0
In Stock
$700
+ −
AK-Builder Center Support & Rivet — Bulgarian-Style (No Flat) Modern, builder-proven center support set patterned after Bulgarian receivers. The sleeve is round (no flat) by design for correct mag-well clearance, machined from alloy steel and heat treated for strength and...
AK Barrel Pin
AKM Barrel Pin
0.0
In Stock
$695
+ −
AKM Barrel Pin Standard AKM-style barrel pin made from 4140 steel , heat treated to match original military specifications. Dimensions are based on Romanian AKM barrel pins, measuring 0.277" (7.04 mm) in diameter. Sold individually.
AK GRIP SCREW AND NUT, C3-71
AK Grip Screw and Nut
0.0
In Stock
$795
+ −
This brand new production replacement grip screw and nut. 4" long. Fits most standard AKM pistol grips. Will NOT fit AMD65 plastic grips.
FurnitureHardware
Side view of 1.5mm heat treated 4130 steel center support and rivet, in the white.
1.5mm Center Support and Rivet
0.0
In Stock
$700
+ −
These are made from heat treated 4130 steel and the rivets are a copy of an original AK center support rivet. The length is shorter than the 1mm center supports since the inside of the 1.5mm flats is smaller
Horizontal view of new production AK47 disconnector spring, dark finished steel.
Save 12%
AK Disconnector Spring
0.0
In Stock
$349 $395 -12%
+ −
New production AK47 disconnector spring.
AK-Builder black oxided heat treated tool steel extended length axis pin with head.
AK Hammer/Trigger Extended Length Axis Pin
0.0
In Stock
$349
+ −
These axis pins are made to work with receivers as wide as 1.390" or 35.3mm. Made from heat treated tool steel for years of use then black oxided. This is for ONE (1) pin only not a set!
AK-Builder 4130 annealed lower bolt guide rails, in the white, with undrilled mag stabilizers.
AK-Builder Lower Bolt Guide Rails
0.0
In Stock
$895
+ −
Get a set of the best US made rails available! These have mag stabilizers on both rails unlike any other rails made in the US.There are no holes drilled in these and should be drilled after being welded into your receiver. These are made from 4130 annealed steel which means "not heat treated".
Trigger guard screw plate in the white, with four black screws installed in receiver.
Trigger Guard Screw Plate
0.0
In Stock
$400
+ −
These trigger guard screw plates are perfect for test assembly for rivet builds or final assembly for screw builds. No need to take small nuts and grind them down to try and make them fit. Comes with the plate and four screws for installation.  If used as a permanant installtion the...
AK-BUILDER FRONT SIGHT & GAS BLOCK SUPPORT, C8-11
AK-Builder Front Sight & Gas Block Support
0.0
In Stock
$2995
+ −
Here is a tool that we have been using to demill and populate our parts kits.  This is made to support the AKM gas block and front sight while removing or installing the pins.  The block is anodized and then laser engraved showing how the gas block or sight sits on the block. These...
BLACK AK RECOIL BUFFER, A3-21
Black AK Recoil Buffer
0.0
In Stock
$1095
+ −
Slides over spring assembly with no disassembly required! Not the hard plastic buffers like the others.
M92/M85 PAP PISTOL MUZZLE DETENT SET, C6-51
M92/M85 PAP Pistol Muzzle Detent Set
0.0
In Stock
$1495
+ −
These detent sets are for the PAP M92/M85 pistols that were shipped without them installed.  Made from 4140 steel and finished with black oxide. Comes with detent, spring and spring pin for installation.   RELATED PRODUCTS:   Click Image(s) below for more info....
AK-BUILDER AK PISTOL GRIP NUT, C3-73
AK-Builder AK Pistol Grip Nut
0.0
In Stock
$549
+ −
This is a copy of an original Polish grip nut that goes on the inside of the receiver. If you are buying a Hogue or any other grip that uses a short screw you can buy this instead of buying the nut/screw and save a few bucks. Made of steel and black oxided.
AK PISTOL GRIP SCREW, C3-74
AK Pistol Grip Screw
0.0
In Stock
$400
+ −
Original length grip screw for attaching the standard style pistol grips. 4" long.
3mm Retainer Pin, Front Sight & Gas Block to Barrel
Save 12%
3mm Retainer Pin Front Sight & Gas Block to Barrel
0.0
In Stock
$289 $329 -12%
+ −
New 3mm Retainer Pin, Front Sight & Gas Block to Barrel. Sold Individually.
NEW SURPLUS AK STOCK SCREW, C7-51
New Surplus AK Stock Screw
0.0
In Stock
$325
+ −
This is for ONE screw not a set of two.  These are original brand new parts not reproduction copies. This screw is for holding the stock in the rear trunnion.
AK-BUILDER MAG CATCH SPRING, A2-25
AK-Builder Mag Catch Spring
0.0
In Stock
$250
+ −
New production magazine catch spring.
AK47 BULLET GUIDE RIVET, A3-12
AK47 Bullet Guide Rivet
0.0
In Stock
$325
+ −
This rivet is used for installing the bullet guide onto a trunnion.
AK47 FRONT SIGHT DETENT NEW, B4-51
AK47 Front Sight Detent New
0.0
In Stock
$595
+ −
These were made like the Romanian and AMD detents and should fit any standard front sight that uses a 14mm threaded muzzle.  THIS WILL NOT FIT AN M92, M70 or M72. The springs are made from stainless steel to keep them from rusting.
AK-BUILDER SELECTOR STOP, A2-21
AK-Builder Selector Stop
0.0
In Stock
$895
+ −
New production selector stops made from 4130 chromoly steel. The machining has been done on this piece to just drop in on a receiver with the correct dimensions.
Show another 20 products
Сategories
Product filters
In Stock
Price
$
–
$
  • $1
  • $230