816-229-0804
AB: FLY menu
Categories

Build Parts

In Stock
Price
Sort by:
Popular First
Show:
80
Red Star Arms FCG pin retaining plate, dark heat-treated steel, side view.
Red Star Arms FCG Pin Retaining Plate
0.0
In Stock
$495
+ −
Original Red Star Arms retaining plate — heat-treated steel, installs in seconds, replaces wire retainer, fits most AKs.
AK-Builder Bulgarian-style center support sleeve and rivet for 1mm receivers, heat treated alloy steel.
AK Center Support for 1mm Receivers
0.0
In Stock
$700
+ −
AK-Builder Center Support & Rivet — Bulgarian-Style (No Flat) Modern, builder-proven center support set patterned after Bulgarian receivers. The sleeve is round (no flat) by design for correct mag-well clearance, machined from alloy steel and heat treated for strength and...
AK Barrel Pin
AKM Barrel Pin
0.0
In Stock
$695
+ −
AKM Barrel Pin Standard AKM-style barrel pin made from 4140 steel , heat treated to match original military specifications. Dimensions are based on Romanian AKM barrel pins, measuring 0.277" (7.04 mm) in diameter. Sold individually.
AK GRIP SCREW AND NUT, C3-71
AK Grip Screw and Nut
0.0
In Stock
$795
+ −
This brand new production replacement grip screw and nut. 4" long. Fits most standard AKM pistol grips. Will NOT fit AMD65 plastic grips.
FurnitureHardware
Side view of 1.5mm heat treated 4130 steel center support and rivet, in the white.
1.5mm Center Support and Rivet
0.0
In Stock
$700
+ −
These are made from heat treated 4130 steel and the rivets are a copy of an original AK center support rivet. The length is shorter than the 1mm center supports since the inside of the 1.5mm flats is smaller
Horizontal view of new production AK47 disconnector spring, dark finished steel.
Save 12%
AK Disconnector Spring
0.0
In Stock
$349 $395 -12%
+ −
New production AK47 disconnector spring.
AK-Builder black oxided heat treated tool steel extended length axis pin with head.
AK Hammer/Trigger Extended Length Axis Pin
0.0
In Stock
$349
+ −
These axis pins are made to work with receivers as wide as 1.390" or 35.3mm. Made from heat treated tool steel for years of use then black oxided. This is for ONE (1) pin only not a set!
AK-Builder 4130 annealed lower bolt guide rails, in the white, with undrilled mag stabilizers.
AK-Builder Lower Bolt Guide Rails
0.0
In Stock
$895
+ −
Get a set of the best US made rails available! These have mag stabilizers on both rails unlike any other rails made in the US.There are no holes drilled in these and should be drilled after being welded into your receiver. These are made from 4130 annealed steel which means "not heat treated".
Trigger guard screw plate in the white, with four black screws installed in receiver.
Trigger Guard Screw Plate
0.0
In Stock
$400
+ −
These trigger guard screw plates are perfect for test assembly for rivet builds or final assembly for screw builds. No need to take small nuts and grind them down to try and make them fit. Comes with the plate and four screws for installation.  If used as a permanant installtion the...
AK-BUILDER FRONT SIGHT & GAS BLOCK SUPPORT, C8-11
AK-Builder Front Sight & Gas Block Support
0.0
In Stock
$2995
+ −
Here is a tool that we have been using to demill and populate our parts kits.  This is made to support the AKM gas block and front sight while removing or installing the pins.  The block is anodized and then laser engraved showing how the gas block or sight sits on the block. These...
BLACK AK RECOIL BUFFER, A3-21
Black AK Recoil Buffer
0.0
In Stock
$1095
+ −
Slides over spring assembly with no disassembly required! Not the hard plastic buffers like the others.
M92/M85 PAP PISTOL MUZZLE DETENT SET, C6-51
M92/M85 PAP Pistol Muzzle Detent Set
0.0
In Stock
$1495
+ −
These detent sets are for the PAP M92/M85 pistols that were shipped without them installed.  Made from 4140 steel and finished with black oxide. Comes with detent, spring and spring pin for installation.   RELATED PRODUCTS:   Click Image(s) below for more info....
AK-BUILDER AK PISTOL GRIP NUT, C3-73
AK-Builder AK Pistol Grip Nut
0.0
In Stock
$549
+ −
This is a copy of an original Polish grip nut that goes on the inside of the receiver. If you are buying a Hogue or any other grip that uses a short screw you can buy this instead of buying the nut/screw and save a few bucks. Made of steel and black oxided.
AK PISTOL GRIP SCREW, C3-74
AK Pistol Grip Screw
0.0
In Stock
$400
+ −
Original length grip screw for attaching the standard style pistol grips. 4" long.
3mm Retainer Pin, Front Sight & Gas Block to Barrel
Save 12%
3mm Retainer Pin Front Sight & Gas Block to Barrel
0.0
In Stock
$289 $329 -12%
+ −
New 3mm Retainer Pin, Front Sight & Gas Block to Barrel. Sold Individually.
NEW SURPLUS AK STOCK SCREW, C7-51
New Surplus AK Stock Screw
0.0
In Stock
$325
+ −
This is for ONE screw not a set of two.  These are original brand new parts not reproduction copies. This screw is for holding the stock in the rear trunnion.
AK-BUILDER MAG CATCH SPRING, A2-25
AK-Builder Mag Catch Spring
0.0
In Stock
$250
+ −
New production magazine catch spring.
AK47 BULLET GUIDE RIVET, A3-12
AK47 Bullet Guide Rivet
0.0
In Stock
$325
+ −
This rivet is used for installing the bullet guide onto a trunnion.
AK47 FRONT SIGHT DETENT NEW, B4-51
AK47 Front Sight Detent New
0.0
In Stock
$595
+ −
These were made like the Romanian and AMD detents and should fit any standard front sight that uses a 14mm threaded muzzle.  THIS WILL NOT FIT AN M92, M70 or M72. The springs are made from stainless steel to keep them from rusting.
AK-BUILDER SELECTOR STOP, A2-21
AK-Builder Selector Stop
0.0
In Stock
$895
+ −
New production selector stops made from 4130 chromoly steel. The machining has been done on this piece to just drop in on a receiver with the correct dimensions.
NEW STAINLESS AK47 FLAT FIRING PIN, C5-62
Save 13%
New Stainless AK47 Flat Firing Pin
0.0
In Stock
$1295 $1495 -13%
+ −
Flat AK-47 7.62X39 firing pin made of stainless steel then heat treated. Made in the USA. Length is 3.282".
AK-Builder PSL Brass Barrel Press Puck, circular brass, top view.
PSL Brass Barrel Press Puck
0.0
Out-of-stock
$995
The PSL Brass Barrel Press Puck is used to press the PSL barrel out of the front trunnion. DO NOT use the other brass nut we sell for the other barrels we offer. Doing so will ruin the chamber end of the PSL barrel.
SINGLE POINT AK SLING ADAPTER PLATE, E2-34
Save 33%
Single Point AK Sling Adapter Plate
0.0
In Stock
$1995 $2995 -33%
+ −
Sling mount attaches under the pistol grip as pictured.  Sling can be attached to either side of the rifle. Will NOT work with an M70, M85 or M92. Made from steel.
AK-BUILDER MAG CATCH PIVOT PIN, A2-24
Save 16%
AK-Builder Mag Catch Pivot Pin
0.0
In Stock
$295 $350 -16%
+ −
New production magazine catch pivot pin. 5mm diameter.
Angled view of AK-Builder undrilled AKM trigger guard, .063" 4130 steel, black oxide.
Save 20%
AK-Builder Undrilled AK Trigger Guard
0.0
In Stock
$1200 $1500 -20%
+ −
New production trigger guard made from .063" 4130 steel with a black oxide finish. These were made to fit the standard AKM receivers, but can still be used with a reinforcement plate on the Bulgarian 74's or any receiver with the reinforcement plates.
4MM RETAINER PIN FOR REAR SIGHT BLOCK, C4-62
4mm Retainer pin for rear sight block
0.0
In Stock
$329
+ −
4mm Retainer pin for rear sight block.
AK SPRING MAINTENANCE KIT FOR AK-47/AK-74, H1-61
AK Spring Maintenance Kit For AK-47/AK-74
0.0
In Stock
$4995
+ −
AK Spring Maintenance Kit For AK-47/AK-74 This 8-Spring Kit Includes: 1-Hammer Retarder Spring 1 - Recoil Spring 1 - Hammer Trigger Spring 1 - Mag Catch Spring 1 - Extractor Spring 1 - Disconnector Spring 1 - Auto Sear Spring 1 - Pivot Pins Retainer Spring.
NEW US MADE AK HAMMER SPRING, C2-41
New US made AK Hammer Spring
0.0
In Stock
$995
+ −
New US made AK47 AK74 Hammer Spring.
RIVET FOR TRIGGER GUARD REAR AK-74 TYPE, C4-31
Rivet for Trigger Guard Rear AK-74 type
0.0
In Stock
$325
+ −
Rivet for Trigger Guard, Rear, AK-74 type. The only reason you would need to use this rivet is for an original AK74 trigger or if you are using an Arsenal Inc trigger to keep from having trigger slap.  If you are using a Tapco, Texas Trigger or Red Star Adjustable Trigger you do not need...
AK-BUILDER SIGHT & GAS BLOCK PIN PUNCH SET, B6-51
Ak-Builder Sight & Gas Block Pin Punch Set
0.0
Out-of-stock
$4995
We designed these punches for demilling parts kits in our shop and use them daily. These can be bought as a set or individually.  The set comes with a 7/16" wrench for holding the punch when removing the pins. The problem with buying regular punches is that you have to cut them down to...
NEW AK FRONT SIGHT POST ORIGINAL STYLE, C10-41
New AK Front Sight Post Original Style
0.0
In Stock
$545
+ −
New US made original style front sight post.  These are made of heat treated steel and black oxided.
YUGO M70-PAP AMBI SLING MOUNT, E4-31
Yugo M70-PAP Ambi Sling Mount
0.0
In Stock
$2295
+ −
Yugo M70-PAP Ambi Sling Mount. Will also work with M92, M85 pistols or other variants with a rivet on pistol grip nut. Will NOT work on an underfolder. No drilling required.  Just take off the pistol grip and place the plate on the receiver and reinstall the grip.
Black oxided AK Front Sight Post with .075 round tip.
New AK Front Sight Post Round .075 Diameter Tip
0.0
In Stock
$845
+ −
New US made original style front sight post with .075" round tip.  These are made of heat treated steel and black oxided.
NEW AK FRONT SIGHT POST ROUND .050 DIAMETER TIP, C11-11
New AK Front Sight Post Round .050 Diameter Tip
0.0
In Stock
$845
+ −
New US made original style front sight post with .050" round tip.  These are made of heat treated steel and black oxided.
AK Single Point AK Sling Adapter Plate
Save 33%
AK Pistol Single Point AK Sling Adapter Plate
0.0
In Stock
$1995 $2995 -33%
+ −
Sling mount attaches under the pistol grip as pictured.  Made from steel. THIS IS NOT MADE TO FIT THE M92 PAP PISTOL.
Angled close-up of blackened East German AK magazine catch, showing pin hole.
East German AK Magazine Catch
0.0
In Stock
$1095
+ −
East German magazine catch.
AK-BUILDER FRONT SIGHT WINDAGE ADJUSTMENT BASE, B5-71
AK-Builder Front Sight Windage Adjustment Base
0.0
In Stock
$750
+ −
New production bases for replacing old parts or for assembling new front sights. These are made from 4140 and heat treated then black oxided. Your choice of original, one groove or three grooves for a visual indication of how much the sight has moved when adjusting.
StyleOne Groove
2.5mm Retainer Pin, YUGO Front Sight & Gas Block to Barrel
2.5mm Retainer Pin YUGO Front Sight & Gas Block to Barrel
0.0
In Stock
$289
+ −
2.5mm Retainer Pin, Front Sight & Gas Block to Barrel. Sold Individually.
NEW AK-74 Oversized Barrel Pin
AK-74 Oversized Barrel Pin .302
0.0
In Stock
$595
+ −
This barrel pin is .302" in diameter. These are heat treated like the originals. Use a 7mm drill to open the hole and then a .300 reamer to make the correct press fit.
NEW SURPLUS AK STOCK SCREW FOR POLYMER STOCK, C7-52
New Surplus AK Stock Screw For Polymer Stock
0.0
In Stock
$325
+ −
New Surplus AK Stock Screw for Polymer Stock. This screw is for holding the stock in the rear trunnion. 
Dark AK Recoil Spring Retainer, top-down view on white background.
AK Recoil Spring Retainer
0.0
Out-of-stock
$449
Brand new AK Recoil spring retainer.
AK-Builder Yugo lower bolt guide rails with mag stabilizers, 4130 annealed steel, in the white.
AK-Builder Lower Bolt Guide Yugo Rails
0.0
In Stock
$1095
+ −
Get a set of the best US made rails available! These have mag stabilizers on both rails unlike any other rails made in the US.There are no holes drilled in these and should be drilled after being welded into your receiver. These are made from 4130 annealed steel which means "not heat treated"....
AK-BUILDER BERYL STOCK RETAINING BRACKET, G7-41
AK-Builder Beryl Stock Retaining Bracket
0.0
In Stock
$1995
+ −
AK-Builder Beryl Stock Retaining Bracket We checked several stocks and the slots were different depths, so the tabs on the bracket are left oversized - you can fit them to your individual stocks.  The original versions are almost non-existent.
Top-down view of anodized AK-Builder Yugo M72 front sight/gas block pin removal block.
Yugo M72 Front Sight/Gas Block Retainer Pin Removal Block
0.0
Out-of-stock
$5995
Here is a tool that we have been using to demill and populate our parts kits.  This is made to support the gas block and front sight while removing or installing the pins.  The block is anodized and then laser engraved showing how the gas block or sight sits on the...
AK CENTER SUPPORT FOR 1MM RECEIVERS WITH BULGARIAN RIVET, B3-71
AK Center Support for 1mm Receivers with Bulgarian Rivet
0.0
In Stock
$750
+ −
These are original Bulgarian rivets. They measure 1.590".Comes with US made sleeve. May not form as large of a head as our rivets we had in the past.
AK-BUILDER RPK 47 LOWER BOLT GUIDE RAILS, E0-11
AK-Builder RPK 47 Lower Bolt Guide Rails
0.0
In Stock
$995
+ −
These rails are made like the originals that didn't use mag dimples on the receiver.  These are made from 4130 steel and are not heat treated.
KP-9 BOLT, E4-15
Save 14%
KP-9 Bolt
0.0
In Stock
$22995 $26598 -14%
+ −
Bolt for a KP-9 Kalashnikov. Stripped of all pins and pins and are not included. Firing pin is not installed.
UPPER HANDGUARD RETAINER SPRING - SURPLUS, E2-11
Upper Handguard Retainer Spring - Surplus
0.0
In Stock
$365
+ −
Surplus upper handguard retainer spring.
US Made AK Magazine Catch
0.0
In Stock
$799
+ −
Replace a worn or damaged magazine catch with this brand-new mag catch, proudly Made in the USA . Built to factory dimensions for AK pattern weapons. This catch ensures secure magazine retention and reliable release action while preserving original ergonomics. Manufactured from heavy gauge...
Save 33%
US Made Trigger Sleeve
0.0
In Stock
$199 $299 -33%
+ −
Upgrade or replace your worn trigger sleeve with this brand-new component, proudly Made in the USA . Machined and formed to tight tolerances for a reliable factory-style fit, this trigger sleeve delivers smooth operation, consistent alignment, and long service life. Available in heavy-gauge...
US Made AK-74 Gas Tube Spring
0.0
In Stock
$529
+ −
Restore positive gas tube retention and reliable cycling with this brand-new gas tube spring, proudly Made in the USA . Manufactured from high-quality spring steel for consistent tension and long fatigue life. This spring provides the correct preload for AK-74 style gas tubes so the tube...
US Made Extractor Spring
0.0
In Stock
$299
+ −
This high-quality Extractor Spring is proudly manufactured in the USA to meet or exceed military and OEM specifications. Designed for reliable performance and long service life, it provides consistent tension for proper extractor function in your firearm’s bolt assembly. Precision-wound...
US Made AK Recoil Spring
0.0
In Stock
$1099
+ −
This US-manufactured AK recoil spring is engineered to restore reliable cycling and consistent bolt carrier return on AK-pattern rifles. Made from high-grade spring steel and heat-treated to exacting tolerance, it delivers predictable spring rate, excellent tension retention, and long...
US Made KP-9 Selector Lever
0.0
In Stock
$1395
+ −
KP-9 pattern  Selector Lever , This is just the stamping to be used for modifications or for creating your own selector lever assembly. Features: Durable Construction: Crafted from hardened steel for long-lasting wear resistance and consistent performance under harsh...
Save 20%
US Made Gas Tube Latch
0.0
In Stock
$799 $995 -20%
+ −
Brand-new, American-made gas tube latch (retainer) for AKM pattern rifles — precision fit, heavy-duty steel, corrosion-resistant finish. Key features Manufactured in the United States Steel construction for strength and durability Corrosion-resistant...
Save 17%
US Made Rear Sight Leaf Spring
0.0
In Stock
$499 $599 -17%
+ −
Restore the proper tension and reliable indexing to your AKM rear sight with this brand-new rear sight leaf spring, proudly Made in the USA . Manufactured to factory-style tolerances from high-quality spring steel, this replacement leaf spring delivers consistent pressure against the rear sight...
Texas Trigger Recoil Buffer
0.0
In Stock
$1500
+ −
Recoil buffers are an easy, cost-effective solution to dampen recoil and is a simple drop-in component. Lightweight and durable, this 3D-printed buffer is designed to help absorb minor impacts, reduce vibration, and minimize wear between moving components.
Save 40%
US Made Rear sight elevation spring
0.0
In Stock
$299 $499 -40%
+ −
Ensure precise and reliable sight adjustment with our Rear Sight Elevation Spring , proudly manufactured in the United States . Crafted from high-strength spring steel , this component provides consistent tension and smooth elevation movement for accurate zeroing and repeatable sight...
Save 25%
New Stainless Galil Firing Pin
0.0
In Stock
$1495 $1995 -25%
+ −
-Precision-machined stainless steel firing pin for a Galil, expertly heat treated for enhanced strength, durability, and long-term reliability. Proudly made in the USA with high-quality craftsmanship and tight tolerances for dependable performance. -Fits spring return assisted 5.56mm bolts...
Сategories
Product filters
In Stock
Price
$
–
$
  • $1
  • $230