816-229-0804
AB: FLY menu
Categories

Other Tools

In Stock
Price
Sort by:
Popular First
Show:
20
AK-Builder AK Trunnion Rivet Hole Drilling Fixture with red 7.62mm and blue 5.45mm mandrels.
AK Trunnion Rivet Hole Drilling Fixture
0.0
In Stock
$9995
+ −
Here is a professional tool for drilling the front and rear trunnion holes in AK47 receivers.  This tool will work with 7.62 and 5.45 trunnions using two different expanding mandrels that fit into the trunnion.  The red mandrel fits the 7.62 and the blue fits the 5.45.  The...
AK-Builder black oxide AKM receiver drilling fixture kit, with included drill bits and supports.
AK-Builder Receiver Blank Drilling Fixture
0.0
In Stock
$13995
+ −
AK-BUILDER Receiver Blank Drilling Fixture This tool is designed to be used with 80% AKM receivers with OR without rails and center supports installed. The bottom of the fixture is also setup to be used if your receiver has trigger humps or a reinforcement plate.   The fixture is...
TypeV-5 Standard or Underfolder-Sidefolder Plates
Angled view of two uncoated high-speed steel 5mm and 7mm reamers for AK receiver pins.
5mm & 7mm Reamer Set
0.0
In Stock
$4495
+ −
5 mm and 7 mm reamer set for finishing AK hammer and trigger pin holes. Use slow speed with cutting oil.
Angled view of AK-Builder steel Rail Alignment Fixture showing front clamp and screw.
AK-Builder Rail Alignment Fixture
0.0
In Stock
$2995
+ −
AK-Builder rail alignment fixture — positions and clamps lower bolt guide rails in stamped receivers for accurate welding and alignment.
RIVET HEAD DRILLING TOOL, B6-31
Rivet Head Drilling Tool
0.0
In Stock
$3795
+ −
Rivet head drilling tool — heat-treated steel, includes 5/32" drill bit. Designed for removing trunnion rivets from AK parts kits.
AK-BUILDER FRONT SIGHT & GAS BLOCK SUPPORT, C8-11
AK-Builder Front Sight & Gas Block Support
0.0
In Stock
$2995
+ −
Here is a tool that we have been using to demill and populate our parts kits.  This is made to support the AKM gas block and front sight while removing or installing the pins.  The block is anodized and then laser engraved showing how the gas block or sight sits on the block. These...
GREEN CHINESE RIVET DRILLING MANDREL, R2-13
Green Chinese Rivet Drilling Mandrel
0.0
In Stock
$1995
+ −
This will fit the smaller diameter Chinese trunnions. Does NOT come with bolt.
.300" BARREL PIN REAMER, A2-32
.300" Barrel Pin Reamer
0.0
$3995
+ −
This is the same reamer we use to work with the .302 barrel pin holes.  Drill the hole first with a 7mm drill then ream the hole.  The reamer has more flutes than a drill and makes a more precise hole.  Be sure the chuck on your drill has the least amount of wobble as possible to...
AKM TRUNNION SUPPORT BLOCK, C8-21
AKM Trunnion Support Block
0.0
In Stock
$3495
+ −
Support plate for pressing in or out your barrel pins on an AKM style trunnion.  These are not specifically made for use with any of the bulged trunnion 1.5mm receivers. These are made from 6061 T6 aluminum then black anodized. Comes with three set screws for leveling the trunnion if...
Close-up of drilled .076" gas port on Bulgarian AK74 gas block.
Cobalt Gas Port Drill for Bulgarian AK74's
0.0
$495
+ −
This drill is .076" and the original port size is .077". More than likely with a cheap drill press or hand drill the bit will cut oversize so it won't really matter. The original hole looks to be drilled with a .156" or 4mm spot drill then drilled with the smaller drill bit.  All the...
Black finish AKFST Heavy Duty Front Sight Tool sealed in clear retail package.
AKFST Heavy Duty Front Sight Tool
0.0
In Stock
$3895
+ −
The AKFST line of AK-47 front sight tools are the first AK front sight tool to be made to the levels of strength and durability the AK end user or manufacturer expects. No extra tools are required. The AKFST have a limited life-time warranty - if the tool breaks under normal use, send the tool...
AK-Builder PSL Brass Barrel Press Puck, circular brass, top view.
PSL Brass Barrel Press Puck
0.0
Out-of-stock
$995
The PSL Brass Barrel Press Puck is used to press the PSL barrel out of the front trunnion. DO NOT use the other brass nut we sell for the other barrels we offer. Doing so will ruin the chamber end of the PSL barrel.
Angled view of dark heat-treated steel gas piston drilling jig, TiN drill bit.
Gas Piston Drilling Jig
0.0
In Stock
$3795
+ −
Gas Piston Drilling Jig Tool for accurately drilling the gas piston rivet hole in the center of the piston. Made from heat-treated steel for durability and includes the correct drill bit for the job. Features Heat-treated steel construction for long life Includes...
AK-BUILDER SIGHT & GAS BLOCK PIN PUNCH SET, B6-51
Ak-Builder Sight & Gas Block Pin Punch Set
0.0
Out-of-stock
$4995
We designed these punches for demilling parts kits in our shop and use them daily. These can be bought as a set or individually.  The set comes with a 7/16" wrench for holding the punch when removing the pins. The problem with buying regular punches is that you have to cut them down to...
Angled view of AK-Builder 12mm x 1.25mm gas piston tap, uncoated HSS.
12mm x 1.25mm Gas Piston Tap
0.0
In Stock
$1595
+ −
12mm × 1.25mm Gas Piston Tap 12 mm × 1.25 tap for cleaning or chasing the gas piston threads in the bolt carrier when fitting a new gas piston. Made from high-speed steel (HSS) for long tool life and consistent cutting performance. Features Size / pitch: 12mm × 1.25mm...
DIE STARTER 14-1 LH, A4-11
Die Starter 14-1 LH
0.0
Out-of-stock
$1500
Die Starter for 14-1 LH 7.62x39 rifles.
BULGED FRONT TRUNNION SUPPORT BLOCK, C11-21
Bulged Front Trunnion Support Block
0.0
In Stock
$2995
+ −
Support plate for pressing in or out your barrel pins on 1.5mm bulged receivers.  These are also used for demilling your front and rear trunnions on 1.5mm bulged receivers. These are made from 6061 T6 aluminum then black anodized.
MILLED Receiver Drilling Fixture
MILLED Receiver Drilling Fixture V2
0.0
In Stock
$11995
+ −
AK-BUILDER Milled Receiver Drilling Fixture This tool is made specifically for the AK-BUILDER 80% Milled Receivers. We can not guarantee this fixture to work with milled receivers made by other manufacturers.  The fixture is machined, case hardened, black oxided and then laser...
Small blue one-inch capacity C-clamp with metallic screw.
One Inch Capacity C-Clamp
0.0
$375
+ −
Small C-Clamp for installing the lower rails in your receiver or for clamping the scribe jig to the bent receiver to mark the cutouts of the top rail.
Two inch capacity C-clamp, dark blue painted body, metallic clamping screw.
Two Inch Capacity C-Clamp
0.0
In Stock
$495
+ −
Two inch C-Clamp for clamping trunnions for test fitting parts to your rifle before final installation.
Show another 13 products
Сategories
Product filters
In Stock
Price
$
–
$
  • $2
  • $160