Muzzle Attatchments

Yugo PAP M92/M85 26mm LH Flash Hider US Made

0.0

In Stock

$32⁹⁵

+ −

These are new Yugo M92 flash hiders that have never been installed on a rifle. Made from 4140 steel and black oxided. We made these in 26mm LH just like the originals. This is an exact copy of the original M92 flash hider and has the hole for 7.62 round. 3.28" long / 4.7 oz....

Thread Size26mm LH

Single black anodized Yugo M92/M85 7-inch barrel extension.

Yugo M92/M85 7" PAP Zastava Barrel Extension/Fake Suppressor Black Anodized

0.0

In Stock

$65⁰⁰

+ −

These M92 Barrel Extensions are made from 6061 aluminum and will bring your barrel to the legal length once permanently attached. These are threaded to fit the M92/M85 26mm LH front sight/gas blocks. Otherwise they wouldn't be called M92/M85 extensions. Weighs 12 oz. Solid aluminum...

Thread Size26mm LH

AK-Builder Slant Brake

0.0

In Stock

$12⁰⁰

+ −

AK-Builder slant brake — original-profile slant, black oxide, 14×1 LH threads, U.S.-marked, 1.31" long.

Thread Size14x1mm LH

Save 20%

AK Fake Suppressor 14-1 LH 4.375" Long

0.0

Out-of-stock

$43⁹⁵ $55⁰⁰ -20%

Made in USA. Aluminum 6061 barrel extension with 14-1 LH threads. 4.3" long and 1.180" in diameter with a .4" bore. 6.4 oz. Hard anodized black and laser engraved. Solid aluminum and can't be taken apart.

Thread Size14x1mm LH

AK Slot Muzzle Brake 14-1mm LH Threads

0.0

In Stock

$17⁵⁰

+ −

Inspired by the highly effective RPK brake found on the AK’s big brother, the AK Slot Brake provides improved styling and helps dampen recoil. Machined from high strength steel. It is threaded in the standard 14 X 1 LH and can be installed as a replacement for any standard threaded AK muzzle....

Thread Size14x1mm LH

Black oxided steel 7.62 Krink 14-1 LH flash hider, angled view of conical end.

7.62 Krink 14-1 Flash Hider

0.0

In Stock

$21⁹⁵

+ −

Made to give you the look of the Krink with 14-1 left hand threads for standard AK's. Made of steel and black oxided Stamped with USA Overall length 3"/ 5.56 oz. This item is made in the United States and counts as a 922r compliant part.

Thread Size14x1mm LH

Save 18%

AMD 65 Extended Muzzle Brake

0.0

In Stock

$32⁹⁵ $40⁰⁰ -18%

+ −

Extended AMD 65 Muzzle Brake 4.3" long/ 7.1 oz. is made from 4140 steel to bring the barrel length of the rifle to 16". Threads are 14-1 left hand. Opening is .417". These were made just like the original machined brakes with the extended part the same body diameter instead of the...

Thread Size14x1mm LH

14-1LH to 24mm x 1.5mm Thread Adapter

5

(Reviews: 1)

Out-of-stock

$11⁹⁹

This adapter fits on the end of a standard 14-1LH threaded AK muzzle and adapts it up to the modern Russian 24mm RH thread design. With this adapter, you can use AK74 type muzzle devices with 24mm threads. Has notches for detent locking pin. .890" long.

Thread Size14x1mm LH

AMD 65 Barrel Extension Steel

0.0

In Stock

$18⁵⁰

+ −

AMD 65 Barrel Extension 14-1lh threads 0.375" bore Total Length (Including threads): 2" Adds 1.375" to the barrel length. Combined with the Original AMD Muzzle Brake, brings barrel to legal 16" length. This last batch has a black oxide finish, they MUST be welded onto your...

Thread Size14x1mm LH

AK-Builder Barrel Nut

0.0

In Stock

$12⁵⁰

+ −

U.S.-made AK barrel nut — 14×1 LH threads, 0.56" long, ~0.3 oz. Sized from Romanian underfolder kit; close fit to Russian milled-style nuts.

Thread Size14x1mm LH

AK Fake Suppressor 14-1 LH 5.5" Long

0.0

Out-of-stock

$54⁹⁵

Made in USA Aluminum 6061 barrel extension with 14-1 LH threads. 5.5" long and 1.180" in diameter with a .4" bore. Hard anodized black and laser engraved. 8-1 oz. Solid aluminum and can't be taken apart. This item is made in the United States and counts as a...

Thread Size14x1mm LH

AK-Builder Tabuk Flash Hider US Made

0.0

In Stock

$54⁹⁵

+ −

New production flash hiders made from 4140 steel and black oxided. 3.69" long / 3.5 oz. / opening is .438". 14-1 left hand threads and should fit any standard barrel threaded for that size. This item is made in the United States and counts as a 922r compliant part.

Thread Size14x1mm LH

Black oxided AK-47 Phantom Flash Hider with twisted slots and 14-1 LH threads.

AK-47 Phantom Flash Hider with Twist Slots 14-1 LH

0.0

Out-of-stock

$29⁹⁵

AK-47 Phantom Flash Hider with Twist Slots Threaded 14-1 Left Hand Twist Made of steel and black oxided. 2 3/16" long/ 1.9 oz. This item is made in the United States and counts as a 922r compliant part.

Thread Size14x1mm LH

Yugo-Zastava M92 M85 26mm Thread Adapter

0.0

In Stock

$19⁹⁵

+ −

These adapters are made in house to go on the 26mm threads and convert down to standard AK threads 14-1lh or AR15 1/2-28 or 5/8-24. Choose the size in the list to get the correct one for your project. Each adapter is engraved with the size of the threads. Made of steel and...

Thread Size26mm LH Thread Size14-1 LH

Guntec USA AK-47 Phantom Flash Hider with Twist Slots 14-1 LH

Save 14%

Roid Remover Flash Hider

0.0

In Stock

$29⁹⁵ $34⁹⁵ -14%

+ −

Very aggressive and sharp pointed flash hider made from 4140 steel and black oxided. Choice of either AK pattern 14-1lh threads or AR15 1/2-28 threads. The flash hider with 14-1lh threads have the detent for the front sight. These are 2.25" long. 2.4-oz. Care should be taken when...

Thread Size1/2-28 AR15

Black oxided Yugo M92/M85 26mm LH brake with castellated end and horizontal slots.

Yugo PAP M92/M85 26mm LH Fishbone Brake

0.0

Out-of-stock

$34⁹⁵

This flash hider is made to fit the Yugo M92/M85 pistols that are on the market. Made from 4140 steel and black oxided. 2.73" long / 4.6 oz. RELATED PRODUCTS: Click Image(s) below for more info. < M92/M85 PAP Pistol Muzzle Detent Set

Thread Size26mm LH

AK Fake Suppressor 24mm 5" Long

0.0

In Stock

$44⁹⁵

+ −

The engraving on these is on both sides and timed with the detent so it will show correctly on both sides. Made in USA, 7.8 oz. Aluminum 6061 barrel extension with 24mm x 1.5rh threads for Bulgarian models. 5" long and 1.250" in diameter with a .4" bore. Solid aluminum and can't...

Thread Size24mm

AK Fake Suppressor 24mm 5" Long

0.0

In Stock

$54⁹⁵

+ −

The engraving on these is on both sides and timed with the detent so it will show correctly on both sides. Made in USA, 7.8 oz. Aluminum 6061 barrel extension with 24mm x 1.5rh threads for Bulgarian models. 5" long and 1.250" in diameter with a .4" bore. Solid aluminum and can't...

Thread Size24mm

AK-47 Phantom Flash Hider

0.0

Out-of-stock

$24⁵⁰

AK-47 Phantom Flash Hider with 14-1 Left Hand Threads. Made from 4140 steel, marked USA and black oxided. 2.25" long / 2.3 oz. This item is made in the United States and counts as a 922r compliant part.

Thread Size14x1mm LH

4in 5in 6in 7in 8in 14-1LH & 1/2-28 Pistol Barrel Extensions

0.0

In Stock

$24⁹⁵

+ −

These barrel extensions are made from steel and have an inner diameter of .400" to work with any pistol that has either 14-1 LH or 1/2"-28 right hand female threads. Permanently attach to your pistol or SBR to bring the barrel length to 16". All our extensions have a 5/8"-24 male thread on...

Thread Size14-1 LH

Zastava Yugo M92/M85 7" PAP Zastava Barrel Extension/Fake Suppressor Black Anodized w/E...

0.0

In Stock

$69⁹⁵

+ −

This is our engraved version of the M92/M85 barrel extension. The engraving may not line up exactly on your rifle due to thread timing. You can sand off the back of the extension or not screw it all of the way on to change the timing of where the engraving will be. These M92...

Thread Size26mm LH

26mm shown for reference only this item is for the 24mm adapter

Bulgarian 24MM Thread Adapter to 14-1 1/2-28 & 5/8-24

0.0

In Stock

$19⁹⁵

+ −

These adapters are made to go on the 24mmx1.5RH threads and convert down to standard AK threads 14-1lh or AR15 1/2-28 or 5/8-24. Choose the size in the list to get the correct one for your project. Each adapter is engraved with the size of the threads. Opening is .345". Made...

Thread Size14-1 LH

Save 31%

AMD 65 Extended Muzzle Brake - Smooth

0.0

In Stock

$25⁰⁰ $36⁰⁰ -31%

+ −

Extended AMD 65 Muzzle Brake - Smooth Body (No machined Vent Holes). These are 4.3" long and made from 4140 steel to bring the barrel length of the rifle to 16". Threads are 14-1 left hand. Opening is .417". These were made just like the original machined brakes (with the exception of vent...

Thread Size14x1mm LH

Yugo M92/M85 PAP Zastava 5" Fake Suppressor Black Anodized

0.0

Out-of-stock

$49⁹⁵

This is our short version of the M92/M85 barrel extension that is only 5" long. These will not work for making the 10" barrel to the 16" length. These M92 fake suppressors are made from 6061 aluminum and can be ordered plain or engraved. These are threaded to fit the M92/M85 26mm...

Thread Size26mm LH