816-229-0804
AB: FLY menu
Categories

Furniture

In Stock
Furniture Type
Price
Sort by:
Popular First
Show:
160
Angled view of parkerized Bulgarian triangle sidefolding stock with 4130 steel trunnion and pins.
Triangle Sidefolding Stock Set
0.0
In Stock
$19995
+ −
This new manufactured stock was modeled off of the Bulgarian triangle series rifles. Length without trunnion is 9 1/4" The trunnion and latch pieces are made from 4130 steel and heat treated to 40-46 Rockwell like the originals.  All of the parts are parkerized and will need to be...
FurnitureFolding Stocks, Buttstocks
AK GRIP SCREW AND NUT, C3-71
AK Grip Screw and Nut
0.0
In Stock
$795
+ −
This brand new production replacement grip screw and nut. 4" long. Fits most standard AKM pistol grips. Will NOT fit AMD65 plastic grips.
FurnitureHardware
Hogue AK-47/AK-74 Rubber Grip with Finger Grooves - Black
Hogue AK-47/AK-74 Rubber Grip with Finger Grooves
0.0
In Stock
$2695
+ −
Hogue overmolded pistol grip for AK variants. US Made and counts towards one part of your 922r compliance.     This item is made in the United States and counts as a 922r compliant part.
ColorBlack FurniturePistol Grips
UNDERFOLDER STOCK ASSEMBLY PIN, C2-21
Underfolder Stock Assembly Pin
0.0
In Stock
$200
+ −
These are sold individually not in sets of three.  The picture shows four pins, but the price is for one.  There is a discount for buying a complete set of three pins. Replace your lost or damaged underfolding stock assembly pins. These replace the pins that hold the nut on the...
FurnitureHardware
BRAND NEW RPK HANDGUARD SET - BLACK PLASTIC, H8-61
Brand New RPK Handguard Set - Black Plastic
0.0
In Stock
$4495
+ −
Brand New RPK Handguard Set - Black Plastic These are made to fit the Romanian RPK's and will not fit the Yugo M72's. Made in Taiwan by the same company that makes our sidefolding stocks. Comes with heat shield installed. Some trimming to fit may be necessary.
FurnitureHandguards
YUGO M70 - M72 T6 STOCK TUBE ADAPTER, J3-51
Yugo M70 - M72 T6 Stock Tube Adapter
0.0
Out-of-stock
$2995
This adapter will install into either a M70 or M72 Yugo fixed stock rear trunnion to adapt to any AR15 stock tube.  There is a set screw in the bottom to fit into the groove of the AR15 tube to keep it square with the receiver. The block is made of 6061 aluminum and then anodized. The...
FurnitureStock Adapter, Collapsible Stocks
AMD 65 Plastic Pistol Grip
0.0
In Stock
$695
+ −
One AMD 65 Grip only, NO hardware. The grip will be scratched or gouged, and colors may not match exactly. 
FurniturePistol Grips
Large Rubber Rear Grip - O/D Green
Save 50%
AK-47 LARGE RUBBER GRIP
0.0
In Stock
$1495 $2995 -50%
+ −
AK 47 LARGE RUBBER GRIP - Heavy rubber coating - Comes with screw and spacer plate - Easy install with Philips head on screw - Fits ANY standard AK-47 rifle - Ergonomic design - Imported not 922r compliant
ColorOD GREEN FurniturePistol Grips
RUBBER RAIL COVERS, S-25
Rubber Rail Covers
0.0
In Stock
$599
+ −
Set of 12 rubber rail covers.  Easy to install and stay in place.
ColorGreen FurnitureQuad Rails
Angled view: AK-Builder AK47/AK74 commercial 6061 T6 hard anodized buffer tube, rubber cap.
AK-Builder AK47-AK74 Stamped 5 Position Commercial Buffer Tube Stock Conversion 6061 T6...
0.0
In Stock
$4995
+ −
We made these since the cheap Chinese made tubes aren't that great and the better tubes seem to always be $100.  These were made to be affordable so anybody can put one on their fixed stock rifle and it not break.  The metal insert may need to be adjusted or sanded to fit since the...
FurnitureStock Adapter, Collapsible Stocks
SAIGA 12 FRONT LATCH SET, C3-13
Save 26%
Saiga 12 Front Latch Set
0.0
In Stock
$6295 $8500 -26%
+ −
Front latch assembly for the Russian side folding stock on the Saiga 12 shotguns. The spring is a little shorter than the original so the hole in the handguard won't need to be drilled as deep.
FurnitureHardware
M4 STOCK FOR AK47 WITH AK-BUILDER TUBE, E3-51
M4 STOCK FOR AK47 With AK-Builder Tube
0.0
In Stock
$7495
+ −
AK COLLAPSIBLE STOCK Fits ALL Stamped AK47s except Yugo, Saiga, Chinese and Krink. 5 Position Stock M4 style stock with AK-Builder aluminium stock tube. Easy install. Black in color. Buttstock is imported and does not count as a 922r part.
FurnitureCollapsible Stocks, Buttstocks
Black steel Polish Beryl AKM sidefolding stock, Warsaw length, with retaining bracket.
Beryl Sidefolding Stock
0.0
In Stock
$21995
+ −
These are reproductions of the rare Polish Beryl AKM folding stock. Warsaw length. These will fit any 1mm stamped receiver AKM. You will need to notch the receiver to clear the sidefolder spring like the original Beryl is. No need for modification or removal of the rear tang. We are also...
Shows metal stock parts, but are not included.
AMD 65 Folding Stock Shell
0.0
In Stock
$3495
+ −
This is the perfect inexpensive solution for poor sight alignment when using an AMD65 Rifle with side folding Stock. This lightweight two piece nylon stock securely attaches to your existing AMD65 side folding stock in minutes with NO modifications. The original stock functions and folds...
FurnitureFolding Stocks, Buttstocks
TDI ARMS AK 47 INTERCHANGEABLE FINGER GROOVE PISTOL GRIP - UPG47, P1-52
TDi Arms AK 47 Interchangeable Finger Groove Pistol Grip - UPG47
0.0
In Stock
$3799
+ −
Pistol Grip Polymer Made Six pieces rubberized interchangeable pistol grip. Allowing the operator to customize their grip to fit all hand sizes for maximum comfort & control. Easily replaces the original AK47/SA58/Galil pistol grip. Provides increased control during firing...
FurniturePistol Grips
ERGONOMIC PLASTIC AK PISTOL GRIP BLACK, E1-51
Ergonomic Plastic AK Pistol Grip Black
0.0
In Stock
$1795
+ −
Ergonomic Pistol Grip For AK-47 W/ Storage Compartment. Imported and does not count towards 922r compliance.
FurniturePistol Grips
FOLDING VERTICAL GRIP, E2-62
Save 53%
Folding Vertical Grip
0.0
In Stock
$1595 $3399 -53%
+ −
Folding Forearm Grip for Vertical or Horizontal Steady Grip. * Improved performance during rapid fire * Easy to fit & secure * Fits Picatinny/Weaver Rail * Improved performance during rapid fire * Light-weight * Molded from reinforced polymer composite * No gunsmithing required...
ColorBLACK FurnitureVertical Grips
HEAVY DUTY BLACK ALLOY VERTICAL GRIP, G6-21
Heavy Duty Black Alloy Vertical Grip
0.0
In Stock
$2295
+ −
Heavy Duty Black Alloy Vertical Grip - Heavy Duty Anodized Alloy Construction. - Storage Compartment. - Firmly Mounts to Picatinny. Made in China
FurnitureVertical Grips
AMD 65 WOOD GRIP SET, F7-51
AMD 65 Wood Grip Set
0.0
In Stock
$2995
+ −
One pair of original AMD 65 wood grips. These may have gouges and/or scrapes and colors may not match each other exactly. Comes as pictured with no screws or nuts for installation.  If you are replacing plastic AMD 65 grips you will need to get two of the standard length grip screws...
Black anodized Yugo M70 OPAP quad rail handguard, angled view showing Picatinny rails.
Yugo M70 Quad Rail Hand Guard
0.0
Out-of-stock
$3995
New quad rail for the Yugo/Zastava M70/PAP rifles with the grenade launcher flip up sight on gas block. These are NOT made in the USA and won't count towards 922r compliance.
FurnitureQuad Rails StyleUn-modified
Key Arma Atom Stock
0.0
In Stock
$3499
+ −
The ATOM stock is a lightweight, ergonomic telescopic stock designed for the comfortable use. Specs: high-quality fiber-reinforced polymer compound injection QD sling mount at the front of the stock Non-slip surface on rubber pad helps keep rifle securely positioned against the...
TDI ZASTAVA LOWER ALUMINUM M-LOK HANDGUARD FOR M70 N-PAP / O-PAP RIFLES, P3-12
TDi Zastava Lower Aluminum M-LOK Handguard for M70 N-PAP / O-PAP rifles
0.0
In Stock
$9995
+ −
The Tdi-Arms Z70 (Zastava AK47) is an aluminum lower MLOK handguard that keeps your rifle light yet operational with all your tactical attachment needs via MLOK system. The Z70 is comparable with the Zastava M70 N-PAP / O-PAP / Z-PAP & M90 rifles also the Z 70 is compatible with the Ultimak...
GEN 2 AK-47 QUAD RAIL WITH NEW BARREL CLAMP DESIGN, P2-41
Gen 2 AK-47 Quad Rail with New Barrel Clamp Design
0.0
Out-of-stock
$3995
 Gen 2 AK-47 Quad Rail with New Barrel Clamp Design Made from anodized aluminum with improved new barrel clamp design. These are not made in the USA and do not count as a 922r compliance part.
FurnitureQuad Rails
SURPLUS GALIL PISTOL GRIP - BLACK (POLYMER), E0-41
Surplus Galil Pistol Grip - Black (Polymer)
0.0
In Stock
$1295
+ −
Used Surplus Black Galil Pistol Grip. Does include screw. Does NOT include the nut.
CountryImport FurniturePistol Grips
ULTIMAK SHORT AK OPTIC MOUNT FOR HUNGARIAN AMD, G1-61
UltiMAK Short AK Optic Mount for Hungarian AMD
0.0
In Stock
$11050
+ −
For Hungarian AKMs Having Shorter-Than-Standard Piston Tubes Also fits most regular, Romanian Dracos (not “Mini” or “Micro” Dracos) (Will not fit, and cannot be made to fit, “Krinkov” type weapons.) Same as M1-B but designed for the shorter piston tube of many Hungarian AKMs. Clamps...
TDI AK47 POLYMER 3 RAIL LOWER HANDGUARD (MILLED/STAMPED), P1-21
TDi AK47 POLYMER 3 RAIL LOWER HANDGUARD (MILLED/STAMPED)
0.0
In Stock
$2795
+ −
LHV47 – AK47 Polymer 3 Rail Lower Handguard AK47 Forearms handguard specifically designed to provide a rigid lightweight platform to mount virtually any Picatinny accessory. * A full length lower Picatinny rails * Easy to fit & secure * Fits Picatinny/Weaver Rail * 2 mini side rails *...
ULTIMAK AK-47 OPTIC MOUNT (WITH SIDE GAS PORTS), G1-51
UltiMAK AK-47 Optic Mount (with side gas ports)
0.0
Out-of-stock
$11050
For standard length, standard weight AKs/AKMs. Has vent holes, as found on Chinese AKs and others. See below for details on compatibility Clamps rock-solid to barrel for maximum stability and accuracy. Replaces the gas tube/upper handguard assembly. Includes steel clamps, screws, Allen...
45 DEGREE SIDE OFFSET 1" RING QD RAIL MOUNT, L1-61
45 Degree Side Offset 1" Ring QD Rail Mount
0.0
In Stock
$1095
+ −
Ring Width: 25.4 mm Rail Width: 20mm Color: Matte Black  Includes:      1 x 1" Ring QD Rail Mount      2 x Allen Key
FurnitureQuad Rails
TDI ENHANCED RUSSIAN AK PISTOL GRIP, P3-52
TDi ENHANCED RUSSIAN AK PISTOL GRIP
0.0
In Stock
$1895
+ −
The TDI-ARMS ERG is an enhanced version of a classic design of a well known widely used grip. However, the original grip lacked the needed NON SLIP texture used for an ergonomic more direct hold. With our custom design “SWAMP MIST” grip pattern & dedicated grip lines the ERG will provide the...
FurniturePistol Grips
ULTIMAK OPTIC MOUNT FOR YUGO/SERBIAN M92 (PAP) AK PISTOL, G2-21
UltiMAK Optic Mount for Yugo/Serbian M92 (PAP) AK Pistol
0.0
In Stock
$11345
+ −
For Zastava pistols, other than M85 pistols. (Not for other AK pistols.) Clamps directly to barrel for maximum stability and accuracy. Replaces the gas tube/upper handguard assembly. Includes steel clamps, screws, Allen wrench and instructions. Easy installation: no gunsmithing...
TDI AKM LOWER ALUMINUM HANDGUARD MLOK BLACK AK47/74/101, P1-61
TDi AKM Lower Aluminum Handguard MLok Black AK47/74/101
0.0
In Stock
$9995
+ −
The TDI-ARMS AKML is a lightweight MLOK lower handguard with side QD. The AKML can fit standard akm stamped receivers (Some fitment might be required) AKM Lower handguard for standard AK platforms features: * 3 side mounting surface features * Light weight construction made from Aviation...
TDI AK M4 STOCK ADAPTER FOR YUGO M70 NPAP AND OPAP, P3-62
TDi AK M4 Stock Adapter for Yugo M70 NPAP and OPAP
0.0
In Stock
$4995
+ −
Tdi-arms SA-M70 is a stationary raised M70 Yugo AK rifle series adapter allowing the user to change the original wood stock to an M4 collapsible stock. The SA-M70 could be purchased as a stand alone adapter that comes with a mounting screw  The SA-M70 is made from T6160 aluminum and...
FurnitureButtstocks, Stock Adapter
ULTIMAK OPTIC MOUNT FOR “KRINKOV” STYLE AKS, G2-51
UltiMAK Optic Mount for “Krinkov” style AKs
0.0
Out-of-stock
$12100
(AKS-74U, SLR-106U/UR, SLR-107U/UR, SAM7K, etc.) Based on the proven and successful M1-B and M2-B UltiMAK AK mounts, adapted to the shorty “Krinks”. Fits most other “Krinkov” style AKs having the same gas system length. Easy installation instructions included. Clamps rock-solid to the...
ULTIMAK AK-47 OPTIC MOUNT (WITHOUT SIDE GAS PORTS), G1-31
UltiMAK AK-47 Optic Mount (without side gas ports)
0.0
In Stock
$11050
+ −
For standard length, standard weight AKs/AKMs, that have original gas tubes without side gas port holes. Clamps rock-solid to barrel for maximum stability and accuracy. Replaces the gas tube/upper handguard assembly. Includes steel clamps, screws, Allen wrench, and instructions. Easy...
TDI AK47 HANDGUARD SET BLACK, P1-41
TDi AK47 Handguard Set Black
0.0
In Stock
$3995
+ −
AK47 handguard specifically designed to provide a rigid lightweight platform to mount virtually any Picatinny accessory. * 2 full length upper and lower Picatinny interface devices * Easy to fit & secure * Fits Picatinny/Weaver Rail * 2 mini side rails * Constructed of high density...
Ultimak Optic Mount for Yugo M70 Series AKs
UltiMak Optic Mount for Yugo M70 Series Rifles
0.0
Out-of-stock
$11295
UltiMAK Optic Mount – Yugo M70 Series (AK) Fits M70, M70A, M70AB, M70AB2, NPAP, OPAP, and similar Yugo-pattern rifles. Not compatible with M72 (RPK) or AK pistols. Why it’s solid Clamps directly to the barrel for rock-solid zero retention and repeatable accuracy...
TDI ZASTAVA LOWER ALUMINUM M-LOK HANDGUARD FOR M92 RIFLES, P3-51
TDi Zastava Lower Aluminum M-LOK Handguard for M92 rifles
0.0
In Stock
$9995
+ −
The Tdi-Arms Z92 (Zastava AK47) is an aluminum lower handguard that keeps your rifle light yet operational with all your tactical attachment needs via MLOK system. The Z92 is compatible with the Zastava M92/M85 rifles also the Z92 is compatible with the Ultimak gas tube rail. The...
ULTIMAK OPTIC MOUNT FOR KALASHNIKOV USA KP-9, G2-61
UltiMAK Optic Mount for Kalashnikov USA KP-9
0.0
In Stock
$11345
+ −
UltiMAK Optic Mount for Kalashnikov KP9 AK Pistol Also fits WBP Mini Jack and Lynx, but with more clearance. Based on the proven and successful M1-B and M2-B UltiMAK AK optic mounts. Clamps rock-solid to barrel for maximum stability and accuracy. Replaces the piston tube/upper...
SURPLUS HUNGARIAN AMMS UNDERFOLDER STOCK ONLY, M-11
Surplus Hungarian AMMS Underfolder Stock ONLY
0.0
In Stock
$3995
+ −
Used Hungarian Underfolding Stock. (USED - Scratches and/or minor dents.) Only the Stock. Hardware and trunnion are not included
FurnitureFolding Stocks, Buttstocks
AKM WOOD UPPER/LOWER HANDGUARD, H4-41
AKM Wood Upper/Lower Handguard
0.0
In Stock
$3495
+ −
Original Hungarian set of furniture off of Hungarian AMMS Underfolders. Will fit most 1mm AKMs. These will show wear.  These will not be in perfect unissued condition as shown by the pictures.  There will be variations in each set we send out. You will get one each of the lower...
FurniturePistol Grips
TDI AKMST-P AK ADAPTER WITH A REAR PICATINNY INTERFACE, P3-22
TDi AKMST-P AK adapter with a rear picatinny interface
0.0
In Stock
$6595
+ −
AKMST-P: An adapter with a rear picatinny interface that allows you to install SIG type folding stocks and braces.      Fits: AKMS Stamped receivers with a flat back interface. Does not fit: YUGO rifles & slant back receivers. NOTE: Please make sure you know the placement...
TDI AK BUFFER TUBE FOR STAMPED RECEIVER, P1-31
TDi AK BUFFER TUBE FOR STAMPED RECEIVER
0.0
In Stock
$4995
+ −
Light weight Aluminum drop in adapter tube for STAMPED receiver AK type rifles features a simple drop in installation process a left side sling loop and an inner storage space the 6 position tube is MIL-SPEC in diameter. Fits: SOVIET/RUSSIAN POLISH BULGARIAN EAST GERMAN EGYPTIAN And any...
FurnitureStock Adapter, Collapsible Stocks, Buttstocks
TDI AK47/AKMS CONVERSION ADAPTER FOR UNDER FOLDER, P1-32
TDi AK47/AKMS CONVERSION ADAPTER FOR UNDER FOLDER
0.0
In Stock
$5995
+ −
AKMST is a stand alone conversion adapter for FLAT back stamped AKMS (UNDERFOLDER)  receivers. The AKMST is a drop in replacement for your underfolding stock and it is available for purchase in several configurations: *  AKMST: An adapter interface for a 6 positions buffer...
FurnitureStock Adapter, Collapsible Stocks, Buttstocks
TDI AK47 SHORT SCOPE MOUNT, P3-32
TDi AK47 Short Scope Mount
0.0
In Stock
$3795
+ −
RSR-AK A simple light weight solution designed for the mounting of Red Dot Sights. Replaces the original the rear AK sight to provide a stable light weight mounting platform. Made of T6160 Aluminum with Hard Anodized and anti scratch Teflon coated for maximum durability Easily attaches...
TDI PISTOL GRIP AK47 KHAKI ENHANCED RUSSIAN GRIP, P3-21
TDi Pistol Grip AK47 Khaki Enhanced Russian Grip
0.0
In Stock
$2095
+ −
The TDI-ARMS ERG is an enhanced version of a classic design of a well known widely used grip. However, the original grip lacked the needed NON SLIP texture used for an ergonomic more direct hold. With our custom design “SWAMP MIST” grip pattern & dedicated grip lines the ERG will provide the...
TDI AK M4 STOCK ADAPTER FOR YUGO M70 NPAP AND OPAP + MIL STD TUBE CASTLE NUT AND A QD PLATE, P3-11
TDi AK M4 Stock Adapter for Yugo M70 NPAP and OPAP + MIL Std Tube Castle Nut and a QD ...
0.0
In Stock
$6995
+ −
Tdi-arms SA-M70T is a stationary raised M70 Yugo AK rifle series adapter allowing the user to change the original wood stock to an M4 collapsible stock. The SA-M70T could be purchased as a stand alone adapter that comes with a mounting screw or the full kit including the SA-M70 adapter +...
FurnitureStock Adapter, Collapsible Stocks, Buttstocks
TDI 1″ FLASHLIGHT MOUNT FOR PICATINNY RAIL, P3-41
TDi 1″ FLASHLIGHT MOUNT FOR PICATINNY RAIL
0.0
In Stock
$1395
+ −
BK – Flashlight Mount for Picatinny Rail Flashlight Mount which can be used on any Picatinny/Weaver rail BK2 suitable for 1″ diameter Flashlight/Laser Special angle-lip design for easy flashlight slide in Easy to fit and dismantle Light-weight Moulded from reinforced polymer composite NSN...
TDI AK BUFFER TUBE FOR UNDERFOLDER CONVERSION, P1-11
TDi AK Buffer Tube for Underfolder Conversion
0.0
In Stock
$8800
+ −
AKMST-K: An adapter with a 6 positions tube interface that includes a 6 position mil spec tube and a castle nut. Fits: AKMS Stamped receivers with a flat back interface. Does not fit: YUGO rifles & slant back receivers. NOTE: Please make sure you know the placement of your rivets on the...
ERGONOMIC PLASTIC AK PISTOL GRIP EARTH, E1-52
Ergonomic Plastic AK Pistol Grip Earth
0.0
In Stock
$1595
+ −
Ergonomic Pistol Grip For AK-47 W/ Storage Compartment. Imported and does not count towards 922r compliance.
FurniturePistol Grips
ERGONOMIC PLASTIC AK PISTOL GRIP TAN, E1-53
Ergonomic Plastic AK Pistol Grip Tan
0.0
In Stock
$1595
+ −
Ergonomic Pistol Grip For AK-47 W/ Storage Compartment. Imported and does not count towards 922r compliance.
FurniturePistol Grips
TDI PICATINNY RAIL WITH MLOK INTERFACE ALUMINUM BLACK 3 SLOTS, P3-31
TDi Picatinny rail with MLOK interface Aluminum Black 3 Slots
0.0
In Stock
$1195
+ −
TDI PICATINNY RAIL WITH MLOK INTERFACE ALUMINUM BLACK 5 SLOTS, P3-61
TDi Picatinny rail with MLOK interface Aluminum Black 5 Slots
0.0
In Stock
$1295
+ −
TDI PICATINNY RAIL WITH MLOK INTERFACE ALUMINUM BLACK 7 SLOTS, P3-33
TDi Picatinny rail with MLOK interface Aluminum Black 7 Slots
0.0
In Stock
$1495
+ −
TDI AK47/GALIL 6PCS INTERCHANGEABLE GRIP KHAKI, P3-23
TDi AK47/Galil 6pcs Interchangeable Grip Khaki
0.0
Out-of-stock
$1995
FOLDING 5-POSITION FOREARM GRIP, P1-62
FOLDING 5-POSITION FOREARM GRIP
0.0
In Stock
$1995
+ −
Quick Overview FFG-4 – Folding 5-Position Forearm Grip • Folding Steady Grip • Locks at horizontal, vertical, 45 & 135 positions • Improved performance during rapid fire • Easy to fit & secure • Fits Picatinny/Weaver Rail • Light-weight • Moulded from reinforced polymer composite • Length...
MODIFIED ROMANIAN LOWER HANDGUARDS, H2-51
Save 17%
Modified Romanian Lower Handguards
0.0
Out-of-stock
$2498 $2998 -17%
Lower handguards off of a Romanian AKM. These are surplus parts and will have wear and tear on them.  Perfect for a battle field pickup build. These lowers were modified by soldiers to remove the vertical grip off the Romanian lower handguard. Many have trench art. Some are totaly hand...
LAMINATE WOODEN FIXED STOCK - NO HARDWARE, H2-31
Laminate Wooden Fixed Stock - No hardware
0.0
In Stock
$1595
+ −
Butt stock off of a Romanian AKM. This are surplus parts and will have wear and tear on them. Doesn't include any hardware (tail plate, rear sling mount, and screws) Butt naked butt stocks. Not much to say.  Conditions will very but, they've seen better days. Can be cleaned up to be...
FurnitureButtstocks
ROMANIAN UPPER AND LOWER HANDGUARD SET, H2-21
Save 5%
Romanian Upper and Lower Handguard set
0.0
In Stock
$9495 $9998 -5%
+ −
All furniture off of a Romanian AKM. This are surplus parts and will have wear and tear on them. We didn't get to choose what we got so neither do you. All lower handguards still have the foregrip attached and are in fair condition. Some may have trench art. Upper handguards are also in...
UTG PRO AK QD SCOPE MOUNT, G5-11
UTG PRO AK QD Scope Mount
0.0
In Stock
$5995
+ −
Proudly Designed and Made in USA Matte Black Anodized 6061-T6 Aluminum Construction Lightweight Design with Deep U-cut Channel for Accessoing Iron Sights 16 Slot Picatinny Top Rail with Detachable 6 Slot Side Rail Adjustable Quick Detach Lever Mount Includes Mount Users...
UTG ACCU-SYNC® AK QR SCOPE MOUNT, UNIVERSAL, G5-31
UTG ACCU-SYNC® AK QR Scope Mount, Universal
0.0
In Stock
$9495
+ −
UTG ACCU-SYNC® AK QR Scope Mount, Universal Features Matte black, steel-reinforced 6061-T6 aluminum construction Tool-free , tension-adjustable steel quick-release (QR) lever mount; fits most standard receiver side rails 16-slot Picatinny top rail...
UTG PRO AK QUAD RAIL HANDGUARD, FOR YUGO M70, G5-41
UTG PRO AK Quad Rail Handguard, for Yugo M70
0.0
Out-of-stock
$9995
Proudly Designed and Made in USA 922R Compliant Quad Rail System for Yugo M70 Models Precision Machined from Aircraft Aluminum and Finished in a Matte Black Anodize Mil-spec Picatinny Quad Rail with Integrally Machined QD Sling Swivel Housings Also Compatible with Zastava N-PAP Series...
FurnitureQuad Rails
TDI R-EX RAIL EXTENSION FOR PICATINNY RAIL, P4-51
TDi R-EX Rail Extension for Picatinny Rail
0.0
In Stock
$4795
+ −
The Tdi-Arms R-EX Rail Extension for Picatinny Rail is a newly launched product that aims to enhance the functionality and customization options of firearms by providing additional mounting space for light and laser accessories on shorter handguards. With a focus on maintaining a safe...
UTG PRO UNIVERSAL AK QUAD RAIL HANDGUARD, G5-61
UTG PRO Universal AK Quad Rail Handguard
0.0
Out-of-stock
$9995
UTG PRO Universal AK quad rail handguard — aircraft aluminum, hardcoat anodized, fits most AK variants, made in USA.
FurnitureQuad Rails
UTG PRO AK SUPER SLIM M-LOK HANDGUARD, G5-21
UTG PRO AK Super Slim M-LOK Handguard
0.0
In Stock
$11995
+ −
Proudly Designed and Made in USA Two-piece Drop-in Design Requires No Permanent Modification Modular Top End Mounts Included 9 Slot Picatinny Rail Section or DOCTER® Footprint MRDS Plate for Optics Installation Compatible with Most Romanian, Chinese, and US AK Pattern Rifles Durable Matte...
Side view of TDi AK Dust Cover with integrated Picatinny rail, matte black hard coat anodized.
TDi AK Dust Cover with Integrated Picatinny Rail
0.0
In Stock
$19995
+ −
The DC9 is a high-quality aluminum replacement dust cover featuring a precision-milled Picatinny scope mount, designed for AK/AKM rifles. It offers a stable and secure platform for mounting any Picatinny-based optics, ensuring quick and effortless drop-in installation. Key Features &...
TDI STITCH-K M-LOK PANEL COVER SET, P4-21
TDi STITCH-K M-Lok Panel Cover Set
0.0
In Stock
$2999
+ −
TDI-Arms is proud to announce the launch of its new STITCH-K  M-Lok Panel cover set. The set is made from heat-resistant polymer, designed to provide superior grip and control to the shooter, even in the most demanding shooting environments. The STITCH-K  M-Lok Panel set is...
TDI AK Handguard Universal 5 Rails System – Short Tail – X47K
0.0
In Stock
$35000
+ −
The X47-K has a shorter mounting optics extension especially designed for red dot & holographic sights.  The TDI-ARMS X47 is the world’s first five rail system for the AK platform. Providing an exceptional design, the five fixed rails allow for the addition of numerous...
US Made KP-9 Selector Lever
0.0
In Stock
$1395
+ −
KP-9 pattern  Selector Lever , This is just the stamping to be used for modifications or for creating your own selector lever assembly. Features: Durable Construction: Crafted from hardened steel for long-lasting wear resistance and consistent performance under harsh...
US Made 7.62 AK Smooth Dust Cover
0.0
In Stock
$2899
+ −
Brand‑new, American‑made dust cover engineered for standard AK‑47 pattern rifles — durable construction, finished for corrosion resistance. Key features Manufactured in the United States Precision‑formed heavy‑grade steel construction Durable...
New US Made 9mm Dust Cover
0.0
In Stock
$4495
+ −
Brand‑new, American‑made dust cover for the 9mm KP‑9 precision fit, durable steel, corrosion‑resistant finish. Key features Manufactured in the United States Heavy‑gauge steel construction for strength and durability Corrosion‑resistant finish for long‑lasting...
US Made Front Recoil Spring Guide Rod
0.0
In Stock
$450
+ −
Replace or upgrade the front recoil guide on your AK with this brand-new, proudly Made in the USA component. Constructed from heavy-gauge steel and finished for corrosion resistance, it’s an ideal choice for maintenance, restoration projects, or keeping a spare on hand. Key features...
Key Arma Atom CP Stock With Cheek Riser
0.0
In Stock
$4299
+ −
DETAILS The ATOM CP stock incorporates a minimalistic design yet offers an adjustable cheeck riser for the shooter to make the stock highly effective. Specs: high quality fiber-reinforced polymer compound injection QD sling mount at the bottom of the stock MILSPEC adjustable cheek...
Save 22%
US Made KP-9 (9mm) Gas Tube 5.3"
0.0
In Stock
$3899 $4995 -22%
+ −
Keep your KP-9 running smoothly with this brand-new 9mm gas tube, proudly Made in the USA . Engineered to OEM dimensions for a reliable, factory-style fit on KP-9 platforms. Built from heavy-gauge steel and finished for corrosion resistance, it’s ideal for repairs, maintenance, or as a spare...
Key Arma Alpha Stock
0.0
In Stock
$3699
+ −
The ALPHA telescopic stock is the lightest full size stock KEY ARMA USA offers. Specs: fiber-reinforced polymer compound injection MILSPEC QD mounts on each side of the stock Rubber pad for proper shoulder retention
UTG 4.2" ITA Red/Green CQB Dot with QD Mount, Riser Adaptor
0.0
In Stock
$8995
+ −
Great Field of View and Unlimited Eye Relief Clear and Sharp 4.0 MOA Dot Sight No-Reflection High Tech Emerald Coatings Red or Green Dot Adapts to Any Environmental Background Optimal Height Design to Co-witness with Iron Sights Includes Both Smart Adaptor & Straight-up Quick...
Save 25%
US Made Rear Recoil Spring Guide Rod
0.0
In Stock
$450 $599 -25%
+ −
Replace or upgrade the rear recoil guide on your AK with this brand-new, proudly Made in the USA component.  Constructed from heavy-gauge steel and finished for corrosion resistance, it’s an ideal choice for maintenance, restoration projects, or keeping a spare on hand. Key features...
Сategories
Product filters
In Stock
Furniture Type
Price
$
–
$
  • $2
  • $350