816-229-0804
AB: FLY menu
Categories

Drills and Taps

In Stock
Price
Sort by:
Popular First
Show:
20
Angled view of two uncoated high-speed steel 5mm and 7mm reamers for AK receiver pins.
5mm & 7mm Reamer Set
0.0
In Stock
$4495
+ −
5 mm and 7 mm reamer set for finishing AK hammer and trigger pin holes. Use slow speed with cutting oil.
GAS PORT DRILL BIT, C7-21
Gas Port Drill Bit
0.0
In Stock
$995
+ −
These are the drill bits I use for drilling 7.62 gas ports.  These will fit into the port and it will guide the drill.  Just press the gas block on first.  This works on the Romanian and AMD65 style (45 degree)gas blocks.  The Bulgarian 74 gas port holes are smaller and need...
RIVET HEAD DRILLING TOOL, B6-31
Rivet Head Drilling Tool
0.0
In Stock
$3795
+ −
Rivet head drilling tool — heat-treated steel, includes 5/32" drill bit. Designed for removing trunnion rivets from AK parts kits.
.300" BARREL PIN REAMER, A2-32
.300" Barrel Pin Reamer
0.0
$3995
+ −
This is the same reamer we use to work with the .302 barrel pin holes.  Drill the hole first with a 7mm drill then ream the hole.  The reamer has more flutes than a drill and makes a more precise hole.  Be sure the chuck on your drill has the least amount of wobble as possible to...
5/32" .1563" SCREW MACHINE DRILL BIT, C1-72
5/32" .1563" Screw Machine Drill Bit
0.0
$295
+ −
These are the same drills I use in the Rivet Drilling tool, drilling gas piston rivet holes and for drilling holes for the 4mm rivet holes in receivers. These are screw machine length drill bits with 135 degree split points to keep drill walk and bending to a minimum. The junk drills from...
7MM SCREW MACHINE DRILL BIT, C1-73
7mm Screw Machine Drill Bit
0.0
$625
+ −
US Made by Precision Twist Drill Screw Machine - Drills Size: 0.2756 In., 7.00 mm Flute Length: 1-11/32, 34 mm Overall Length: 2-29/32, 74 mm Finish/Coating: Black Oxide Point Angle°: 135 Point Type: Split
Close-up of drilled .076" gas port on Bulgarian AK74 gas block.
Cobalt Gas Port Drill for Bulgarian AK74's
0.0
$495
+ −
This drill is .076" and the original port size is .077". More than likely with a cheap drill press or hand drill the bit will cut oversize so it won't really matter. The original hole looks to be drilled with a .156" or 4mm spot drill then drilled with the smaller drill bit.  All the...
#16 .177" SCREW MACHINE DRILL BIT, C1-71
#16 .177" Screw Machine Drill Bit
0.0
$495
+ −
This drill is used for drilling holes for the 4.5mm rivet holes in the bent receivers as well as opening the hammer pin hole on my flats before reaming to 5mm. These are screw machine length drill bits with 135 degree split points to keep drill walk and bending to a minimum. The junk drills...
3MM SCREW MACHINE DRILL BIT, C7-22
3mm Screw Machine Drill Bit
0.0
$365
+ −
Material: HSS Screw Machine - Drills Size: 0.1181 In 3.00 mm Flute Length: 5/8, 16 mm Overall Length: 1-13/16, 46 mm Finish/Coating: Black Oxide Point Angle°: 135 Point Type: Split Rotation: Right Hand.
5MM SCREW MACHINE DRILL BIT, C7-61
5mm Screw Machine Drill Bit
0.0
$625
+ −
HSS Screw Machine - Drills Size: 0.1969 In., 5.00 mm Flute Length: 1-1/32, 26 mm Overall Length: 2-7/16, 62 mm Finish/Coating: Black Oxide Point Angle°: 135 Point Type: Split
.314" REAMER, A2-33
.314" Reamer
0.0
$2500
+ −
Use this reamer for the .315" (8mm) oversize barrel pins.  Start with the hole drilled at 7mm then switch to the reamer.
4MM SCREW MACHINE DRILL BIT, C7-23
4mm Screw Machine Drill Bit
0.0
$465
+ −
HSS Screw Machine - Drills Size: 0.1575 In., 4.00 mm Flute Length: 7/8, 22 mm Overall Length: 2-5/32, 55 mm Finish/Coating: Black Oxide Point Angle°: 135 Point Type: Split Rotation: Right Hand
Angled view of AK-Builder 12mm x 1.25mm gas piston tap, uncoated HSS.
12mm x 1.25mm Gas Piston Tap
0.0
In Stock
$1595
+ −
12mm × 1.25mm Gas Piston Tap 12 mm × 1.25 tap for cleaning or chasing the gas piston threads in the bolt carrier when fitting a new gas piston. Made from high-speed steel (HSS) for long tool life and consistent cutting performance. Features Size / pitch: 12mm × 1.25mm...
DIE STARTER 14-1 LH, A4-11
Die Starter 14-1 LH
0.0
Out-of-stock
$1500
Die Starter for 14-1 LH 7.62x39 rifles.
10MM SCREW MACHINE DRILL BIT, C2-22
10mm Screw Machine Drill Bit
0.0
$1095
+ −
This drill bit is for drilling the large selector hole on the right side of the receiver. This makes the larger side of the keyhole.  Get our 7/32 drill bit for the smaller hole. US Made by Interstate Screw Machine - Drills Size: 0.3937 In., 10.00 mm Finish/Coating: Black...
7/32 SCREW MACHINE DRILL BIT, C2-23
7/32 Screw Machine Drill Bit
0.0
$595
+ −
This drill bit is for drilling the front edge of the keyhole for the selector on the right side of the receiver. US Made by Precision Twist Drill. Screw Machine - Drills Size: 0.2188 In., 7/32" Finish/Coating: Black Oxide Point Angle°: 135
M12X1.25 GAS PISTON DIE, C4-21
M12x1.25 Gas Piston Die
0.0
In Stock
$4250
+ −
This die will fix damaged threads on gas pistons as well as put new threads on custom made pistons.
#21 SCREW MACHINE DRILL BIT, C4-22
#21 Screw Machine Drill Bit
0.0
$495
+ −
#21 Screw Machine Drill Bit
Side view of an uncoated 2.5mm screw machine drill bit.
2.5mm Screw Machine Drill Bit
0.0
In Stock
$365
+ −
2.5mm Screw Machine Drill Bit
DIE HANDLE FOR 1.5" THREADING DIES, C3-51
Die Handle for 1.5" Threading Dies
0.0
In Stock
$1095
+ −
This is used with our 12-1.25 dies sold on the website.
Show another 4 products
Сategories
Product filters
In Stock
Price
$
–
$
  • $2
  • $45