816-229-0804

Home/Drills and Taps/5mm & 7mm Reamer Set

5mm & 7mm Reamer Set

CODE:

A2-31

Write a review

$44⁹⁵

In Stock

+ −

Ask a question

Angled view of two uncoated high-speed steel 5mm and 7mm reamers for AK receiver pins.

Description
Related Products
Reviews

5mm & 7mm Reamer Set

5mm and 7mm reamers used to finish the hammer and trigger pin holes on AK-Builder receiver flats. They clean up the drilled holes to the correct size so the axis pins fit smoothly.

Run them at slow speed with cutting oil for the best finish and tool life.

Specs

Sizes: 5mm and 7mm
Material: High-speed steel.
For finishing hammer / trigger axis pin holes on AK receiver flats.
Recommended use: slow RPM with cutting oil.

AK Trunnion Rivet Hole Drilling Fixture

0.0

CODE:

T3-11

Here is a professional tool for drilling the front and rear trunnion holes in AK47 receivers. This tool will work with 7.62 and 5.45 trunnions using two different expanding mandrels that fit into the trunnion. The red mandrel fits the 7.62 and the blue fits the 5.45. The...

$99⁹⁵

In Stock

Quantity:

+ −

Add to Cart

.300" Barrel Pin Reamer

0.0

CODE:

A2-32

This is the same reamer we use to work with the .302 barrel pin holes. Drill the hole first with a 7mm drill then ream the hole. The reamer has more flutes than a drill and makes a more precise hole. Be sure the chuck on your drill has the least amount of wobble as possible to...

$39⁹⁵

Quantity:

+ −

AK-Builder Bulgarian-style center support sleeve and rivet for 1mm receivers, heat treated alloy steel.

AK Center Support for 1mm Receivers

0.0

CODE:

A1-31

AK-Builder Center Support & Rivet — Bulgarian-Style (No Flat) Modern, builder-proven center support set patterned after Bulgarian receivers. The sleeve is round (no flat) by design for correct mag-well clearance, machined from alloy steel and heat treated for strength and...

$7⁰⁰

In Stock

Quantity:

+ −

Rivet Head Drilling Tool

0.0

CODE:

B6-31

Rivet head drilling tool — heat-treated steel, includes 5/32" drill bit. Designed for removing trunnion rivets from AK parts kits.

$37⁹⁵

In Stock

Quantity:

+ −

AK-Builder AK Rivet Set

0.0

CODE:

A0-61

The new long rear trunnion rivets have a slightly shorter head and the cupped tool that supports the rivets will need to be sanded down to keep the tool from touching the receiver. Be sure to check this before installing the new black rivets. These have the correct swell...

Options:

AKM Fixed Stock AK74 Sidefolder AK74 Fixed Stock AKS Underfolder Yugo M92/M70 1mm Underfolder Yugo M70/M72 Fixed Stock Yugo M70 1.5mm Underfolder Bulgarian RPK 74 Chinese Mak 90 Korean Type 68 Underfolder (More +3)

OptionsAKM Fixed Stock

$9⁰⁰

In Stock

Quantity:

+ −

Add to Cart

Angled view of AK-Builder steel Rail Alignment Fixture showing front clamp and screw.

AK-Builder Rail Alignment Fixture

0.0

CODE:

C3-61

AK-Builder rail alignment fixture — positions and clamps lower bolt guide rails in stamped receivers for accurate welding and alignment.

$29⁹⁵

In Stock

Quantity:

+ −

No reviews found