816-229-0804

Home/Drills and Taps/#16 .177" Screw Machine Drill Bit

#16 .177" Screw Machine Drill Bit

CODE:

C1-71

Write a review

$4⁹⁵

+ −

Ask a question

#16 .177" SCREW MACHINE DRILL BIT, C1-71

Description
Related Products
Reviews

This drill is used for drilling holes for the 4.5mm rivet holes in the bent receivers as well as opening the hammer pin hole on my flats before reaming to 5mm.

These are screw machine length drill bits with 135 degree split points to keep drill walk and bending to a minimum. The junk drills from Home Depot, Harbor Freight and most hardware stores are jobber length with 118 degree points that bend and walk more.

5/32" .1563" Screw Machine Drill Bit

0.0

CODE:

C1-72

These are the same drills I use in the Rivet Drilling tool, drilling gas piston rivet holes and for drilling holes for the 4mm rivet holes in receivers. These are screw machine length drill bits with 135 degree split points to keep drill walk and bending to a minimum. The junk drills from...

$2⁹⁵

Quantity:

+ −

Angled view of two uncoated high-speed steel 5mm and 7mm reamers for AK receiver pins.

5mm & 7mm Reamer Set

0.0

CODE:

A2-31

5 mm and 7 mm reamer set for finishing AK hammer and trigger pin holes. Use slow speed with cutting oil.

$44⁹⁵

In Stock

Quantity:

+ −

AK Trunnion Rivet Hole Drilling Fixture

0.0

CODE:

T3-11

Here is a professional tool for drilling the front and rear trunnion holes in AK47 receivers. This tool will work with 7.62 and 5.45 trunnions using two different expanding mandrels that fit into the trunnion. The red mandrel fits the 7.62 and the blue fits the 5.45. The...

$99⁹⁵

In Stock

Quantity:

+ −

Add to Cart

Gas Port Drill Bit

0.0

CODE:

C7-21

These are the drill bits I use for drilling 7.62 gas ports. These will fit into the port and it will guide the drill. Just press the gas block on first. This works on the Romanian and AMD65 style (45 degree)gas blocks. The Bulgarian 74 gas port holes are smaller and need...

$9⁹⁵

In Stock

Quantity:

+ −

AK-Builder AK Rivet Set

0.0

CODE:

A0-61

The new long rear trunnion rivets have a slightly shorter head and the cupped tool that supports the rivets will need to be sanded down to keep the tool from touching the receiver. Be sure to check this before installing the new black rivets. These have the correct swell...

Options:

AKM Fixed Stock AK74 Sidefolder AK74 Fixed Stock AKS Underfolder Yugo M92/M70 1mm Underfolder Yugo M70/M72 Fixed Stock Yugo M70 1.5mm Underfolder Bulgarian RPK 74 Chinese Mak 90 Korean Type 68 Underfolder (More +3)

OptionsAKM Fixed Stock

$9⁰⁰

In Stock

Quantity:

+ −

Add to Cart

.300" Barrel Pin Reamer

0.0

CODE:

A2-32

This is the same reamer we use to work with the .302 barrel pin holes. Drill the hole first with a 7mm drill then ream the hole. The reamer has more flutes than a drill and makes a more precise hole. Be sure the chuck on your drill has the least amount of wobble as possible to...

$39⁹⁵

Quantity:

+ −

No reviews found