816-229-0804

Home/Drills and Taps/7/32 Screw Machine Drill Bit

7/32 Screw Machine Drill Bit

CODE:

C2-23

Write a review

$5⁹⁵

+ −

Ask a question

Description
Related Products
Reviews

This drill bit is for drilling the front edge of the keyhole for the selector on the right side of the receiver.

US Made by Precision Twist Drill.

Screw Machine - Drills Size: 0.2188 In., 7/32"

Finish/Coating: Black Oxide

Point Angle°: 135

5/32" .1563" Screw Machine Drill Bit

0.0

CODE:

C1-72

These are the same drills I use in the Rivet Drilling tool, drilling gas piston rivet holes and for drilling holes for the 4mm rivet holes in receivers. These are screw machine length drill bits with 135 degree split points to keep drill walk and bending to a minimum. The junk drills from...

$2⁹⁵

Quantity:

+ −

Angled view of two uncoated high-speed steel 5mm and 7mm reamers for AK receiver pins.

5mm & 7mm Reamer Set

0.0

CODE:

A2-31

5 mm and 7 mm reamer set for finishing AK hammer and trigger pin holes. Use slow speed with cutting oil.

$44⁹⁵

In Stock

Quantity:

+ −

7mm Screw Machine Drill Bit

0.0

CODE:

C1-73

US Made by Precision Twist Drill Screw Machine - Drills Size: 0.2756 In., 7.00 mm Flute Length: 1-11/32, 34 mm Overall Length: 2-29/32, 74 mm Finish/Coating: Black Oxide Point Angle°: 135 Point Type: Split

$6²⁵

Quantity:

+ −

10mm Screw Machine Drill Bit

0.0

CODE:

C2-22

This drill bit is for drilling the large selector hole on the right side of the receiver. This makes the larger side of the keyhole. Get our 7/32 drill bit for the smaller hole. US Made by Interstate Screw Machine - Drills Size: 0.3937 In., 10.00 mm Finish/Coating: Black...

$10⁹⁵

Quantity:

+ −

5mm Screw Machine Drill Bit

0.0

CODE:

C7-61

HSS Screw Machine - Drills Size: 0.1969 In., 5.00 mm Flute Length: 1-1/32, 26 mm Overall Length: 2-7/16, 62 mm Finish/Coating: Black Oxide Point Angle°: 135 Point Type: Split

$6²⁵

Quantity:

+ −

Rivet Head Drilling Tool

0.0

CODE:

B6-31

Rivet head drilling tool — heat-treated steel, includes 5/32" drill bit. Designed for removing trunnion rivets from AK parts kits.

$37⁹⁵

In Stock

Quantity:

+ −

No reviews found