816-229-0804

Home/Other Tools/7/16 Wrench

7/16 Wrench

CODE:

M-23

Write a review

$5⁹⁵

In Stock

+ −

Ask a question

Description
Related Products
Reviews

This wrench is for use with our pin punches to hold the punch in place to keep from hitting your hand when starting stubborn gas block/front sight pins.

Ak-Builder Sight & Gas Block Pin Punch Set

0.0

CODE:

B6-51

We designed these punches for demilling parts kits in our shop and use them daily. These can be bought as a set or individually. The set comes with a 7/16" wrench for holding the punch when removing the pins. The problem with buying regular punches is that you have to cut them down to...

$49⁹⁵

Availability: Out-of-stock

Ak-Builder 4mm Starter Pin Punch

0.0

CODE:

N-13

We designed these punches for demilling parts kits in our shop and use them daily. These can be bought as a set or individually. The problem with buying regular punches is that you have to cut them down to make a starter punch to get the 3mm and 4mm pins to start moving. Once they...

$9⁹⁵

In Stock

Quantity:

+ −

Ak-Builder 3mm Starter Pin Punch

0.0

CODE:

N-11

This punch is used for the 3mm pins on standard gas blocks and front sights. We designed these punches for demilling parts kits in our shop and use them daily. These can be bought as a set or individually. The problem with buying regular punches is that you have to cut them down to...

$9⁹⁵

Availability: Out-of-stock

Ak-Builder 3mm Finish Pin Punch

0.0

CODE:

N-12

This punch is used for the 3mm pins on standard gas blocks and front sights once it has started to move using another punch. Using the long punch to start the pin to move can cause the punch to bend. We designed these punches for demilling parts kits in our shop and use them daily....

$9⁹⁵

Availability: Out-of-stock

Ak-Builder 4mm Medium Pin Punch

0.0

CODE:

N-14

This punch is used for the 4mm pin in the rear sight if it is still tight after using the starter punch. We designed these punches for demilling parts kits in our shop and use them daily. These can be bought as a set or individually. The problem with buying regular punches is that...

$9⁹⁵

In Stock

Quantity:

+ −

Ak-Builder 4mm Finish Pin Punch

0.0

CODE:

N-15

This punch is used for the 4mm pin to drive it completely out of the rear sight. It is best to use a starter length punch to get the pin to move otherwise it you will bend the punch if the pin is tight in the sight block. We designed these punches for demilling parts kits in our shop...

$9⁹⁵

In Stock

Quantity:

+ −

No reviews found