816-229-0804

Home/Furniture/Yugo M70 - M72 T6 Stock Tube Adapter

Yugo M70 - M72 T6 Stock Tube Adapter

CODE:

J3-51

Write a review

$29⁹⁵

Out-of-stock

Ask a question

YUGO M70 - M72 T6 STOCK TUBE ADAPTER, J3-51

Description
Features
Related Products
Reviews

This adapter will install into either a M70 or M72 Yugo fixed stock rear trunnion to adapt to any AR15 stock tube. There is a set screw in the bottom to fit into the groove of the AR15 tube to keep it square with the receiver.

The block is made of 6061 aluminum and then anodized.

The block, screws and tools come in the set. The stock tube and stock does not come with the kit.

Red Star Arms FCG Pin Retaining Plate

0.0

CODE:

A1-21

Original Red Star Arms retaining plate — heat-treated steel, installs in seconds, replaces wire retainer, fits most AKs.

$4⁹⁵

In Stock

Quantity:

+ −

AK Slot Muzzle Brake 14-1mm LH Threads

0.0

CODE:

C2-12

Inspired by the highly effective RPK brake found on the AK’s big brother, the AK Slot Brake provides improved styling and helps dampen recoil. Machined from high strength steel. It is threaded in the standard 14 X 1 LH and can be installed as a replacement for any standard threaded AK muzzle....

Thread Size14x1mm LH

$17⁵⁰

In Stock

Quantity:

+ −

AK-Builder AK Rivet Set

0.0

CODE:

A0-61

The new long rear trunnion rivets have a slightly shorter head and the cupped tool that supports the rivets will need to be sanded down to keep the tool from touching the receiver. Be sure to check this before installing the new black rivets. These have the correct swell...

Options:

AKM Fixed Stock AK74 Sidefolder AK74 Fixed Stock AKS Underfolder Yugo M92/M70 1mm Underfolder Yugo M70/M72 Fixed Stock Yugo M70 1.5mm Underfolder Bulgarian RPK 74 Chinese Mak 90 Korean Type 68 Underfolder (More +3)

OptionsAKM Fixed Stock

$9⁰⁰

In Stock

Quantity:

+ −

Add to Cart

Side view of 1.5mm heat treated 4130 steel center support and rivet, in the white.

1.5mm Center Support and Rivet

0.0

CODE:

C8-51

These are made from heat treated 4130 steel and the rivets are a copy of an original AK center support rivet. The length is shorter than the 1mm center supports since the inside of the 1.5mm flats is smaller

$7⁰⁰

In Stock

Quantity:

+ −

AK Trunnion Rivet Hole Drilling Fixture

0.0

CODE:

T3-11

Here is a professional tool for drilling the front and rear trunnion holes in AK47 receivers. This tool will work with 7.62 and 5.45 trunnions using two different expanding mandrels that fit into the trunnion. The red mandrel fits the 7.62 and the blue fits the 5.45. The...

$99⁹⁵

In Stock

Quantity:

+ −

Add to Cart

Close-up of drilled .076" gas port on Bulgarian AK74 gas block.

Cobalt Gas Port Drill for Bulgarian AK74's

0.0

CODE:

C4-23

This drill is .076" and the original port size is .077". More than likely with a cheap drill press or hand drill the bit will cut oversize so it won't really matter. The original hole looks to be drilled with a .156" or 4mm spot drill then drilled with the smaller drill bit. All the...

$4⁹⁵

Quantity:

+ −

No reviews found