M70/M72 Yugo 1.5mm NO-HOLES Flat

Finally there is an alternative to the home builder to make your own professional grade 1.5mm receiver from a flat. The material these are made from is .063 4130 Chromoly steel that is in the annealed condition. Yes annealed means it needs to be heat treated. Yes the flats come with rails as always and both are made from annealed 4130 and are .050" thick. The mag stabilizers/guides need to be trimmed just like all of my other rails.

These flats do NOT have any trunnion, center support, trigger guard, axis pin, sling swivel slot or selector holes drilled.

Side view of 1.5mm heat treated 4130 steel center support and rivet, in the white.

1.5mm Center Support and Rivet

0.0

CODE:

C8-51

These are made from heat treated 4130 steel and the rivets are a copy of an original AK center support rivet. The length is shorter than the 1mm center supports since the inside of the 1.5mm flats is smaller

$7⁰⁰

In Stock

Quantity:

+ −

Standard AK47 Fixed Stock 7.62 Flat

0.0

CODE:

B1-71Y

Now with Y & I embossing! These flats can be used for about any 1mm thick 7.62 receiver. Without the trunnion holes you can put any rear trunnion on the receiver once bent. Receiver flat thickness= 1mm (.040") Material 4130 Annealed Comes with...

Flat options:

With Y & I Embossing

Flat optionsWith Y & I Embossing Receiver Thickness1mm

$44⁹⁵

In Stock

Quantity:

+ −

Add to Cart

AK-Builder AK Rivet Set

0.0

CODE:

A0-61

The new long rear trunnion rivets have a slightly shorter head and the cupped tool that supports the rivets will need to be sanded down to keep the tool from touching the receiver. Be sure to check this before installing the new black rivets. These have the correct swell...

Options:

AKM Fixed Stock AK74 Sidefolder AK74 Fixed Stock AKS Underfolder Yugo M92/M70 1mm Underfolder Yugo M70/M72 Fixed Stock Yugo M70 1.5mm Underfolder Bulgarian RPK 74 Chinese Mak 90 Korean Type 68 Underfolder (More +3)

OptionsAKM Fixed Stock

$9⁰⁰

In Stock

Quantity:

+ −

Add to Cart

AK-Builder Bulgarian-style center support sleeve and rivet for 1mm receivers, heat treated alloy steel.

AK Center Support for 1mm Receivers

0.0

CODE:

A1-31

AK-Builder Center Support & Rivet — Bulgarian-Style (No Flat) Modern, builder-proven center support set patterned after Bulgarian receivers. The sleeve is round (no flat) by design for correct mag-well clearance, machined from alloy steel and heat treated for strength and...

$7⁰⁰

In Stock

Quantity:

+ −

AK-Builder Yugo M72 RPK 1.5mm receiver flat, annealed 4130 Chromoly steel with rails.

Yugo M72 1.5mm RPK Receiver Flat

0.0

CODE:

B3-21

Finally there is an alternative to the home builder to make your own professional grade 1.5mm receiver from a flat. The material these are made from is .063 4130 Chromoly steel that is in the annealed condition. Yes annealed means it needs to be heat treated. Yes the flats come with rails as...

Receiver Thickness1.5mm

$57⁵⁰

In Stock

Quantity:

+ −

AK-Builder AK74 5.45x39 receiver flat, 4130 annealed, in the white, with 5.45 magwell dimples.

AK74 5.45x39 Fixed Stock Receiver Flat

0.0

CODE:

B2-41Y

This flat has the magwell and mag dimples to match the 5.45 magazines which are narrower then 7.62 mags. There are no front or rear trunnion holes. Receiver flat thickness= 1mm (.040") Material 4130 Annealed Comes with bolt guide rails...

Premium Flat Options:

With Y & I Embossing

Premium Flat OptionsWith Y & I Embossing Receiver Thickness1mm

$45⁹⁵

In Stock

Quantity:

+ −

Add to Cart

No reviews found