816-229-0804

Home/Other Tools/2.5mm Starter Punch

2.5mm Starter Punch

CODE:

A4-32

Write a review

$14⁹⁵

In Stock

+ −

Ask a question

Angled view AK-Builder 2.5mm black oxided tool steel starter punch with hex head.

Description
Related Products
Reviews

This punch is used for the 2.5mm pins on yugo gas blocks and front sights.

We designed these punches for demilling parts kits in our shop and use them daily. These can be bought as a set or individually.

The problem with buying regular punches is that you have to cut them down to make a starter punch to get the 2mm pins to start moving. Once they start then punching them out the rest of the way with a longer punch usually is the easier part. The punches have a hex head with an o-ring so you can use a 7/16" wrench to hold the punch without having to worry about hitting yourself when trying to get the pin started to move.

The punches are made of tool steel and heat treated then black oxided. Be sure to wear eye protection when using any punch.

Rivet Head Drilling Tool

0.0

CODE:

B6-31

Rivet head drilling tool — heat-treated steel, includes 5/32" drill bit. Designed for removing trunnion rivets from AK parts kits.

$37⁹⁵

In Stock

Quantity:

+ −

AK-Builder AK Rivet Set

0.0

CODE:

A0-61

The new long rear trunnion rivets have a slightly shorter head and the cupped tool that supports the rivets will need to be sanded down to keep the tool from touching the receiver. Be sure to check this before installing the new black rivets. These have the correct swell...

Options:

AKM Fixed Stock AK74 Sidefolder AK74 Fixed Stock AKS Underfolder Yugo M92/M70 1mm Underfolder Yugo M70/M72 Fixed Stock Yugo M70 1.5mm Underfolder Bulgarian RPK 74 Chinese Mak 90 Korean Type 68 Underfolder (More +3)

OptionsAKM Fixed Stock

$9⁰⁰

In Stock

Quantity:

+ −

Add to Cart

Angled view of AK-Builder 2.5mm black oxided punch with hex head, for Yugo pins.

2.5mm Punch

0.0

CODE:

A4-33

This punch is used for the 2.5mm pins on yugo gas blocks and front sights. We designed these punches for demilling parts kits in our shop and use them daily. These can be bought as a set or individually. The problem with buying regular punches is that you have to cut them...

$14⁹⁵

In Stock

Quantity:

+ −

PSL Brass Barrel Press Puck

0.0

CODE:

R2-52

The PSL Brass Barrel Press Puck is used to press the PSL barrel out of the front trunnion. DO NOT use the other brass nut we sell for the other barrels we offer. Doing so will ruin the chamber end of the PSL barrel.

$9⁹⁵

Availability: Out-of-stock

AK-Builder Front Sight & Gas Block Support

0.0

CODE:

C8-11

Here is a tool that we have been using to demill and populate our parts kits. This is made to support the AKM gas block and front sight while removing or installing the pins. The block is anodized and then laser engraved showing how the gas block or sight sits on the block. These...

$29⁹⁵

In Stock

Quantity:

+ −

.300" Barrel Pin Reamer

0.0

CODE:

A2-32

This is the same reamer we use to work with the .302 barrel pin holes. Drill the hole first with a 7mm drill then ream the hole. The reamer has more flutes than a drill and makes a more precise hole. Be sure the chuck on your drill has the least amount of wobble as possible to...

$39⁹⁵

Quantity:

+ −

No reviews found