816-229-0804

Home/Drills and Taps/.122" Drill Bit

.122" Drill Bit

CODE:

C7-53

Write a review

$3⁹⁵

In Stock

+ −

Ask a question

AK-Builder .122 black oxide drill bit for milled receiver fixture.

Description
Related Products
Reviews

Replacement drill bit for our milled receiver drilling fixture. Used to drill the selector stop hole and for drilling the trigger hole before milling/cutting. Original bit may have 3.1 on the side. They are the same size bit.

Angled view of two uncoated high-speed steel 5mm and 7mm reamers for AK receiver pins.

5mm & 7mm Reamer Set

0.0

CODE:

A2-31

5 mm and 7 mm reamer set for finishing AK hammer and trigger pin holes. Use slow speed with cutting oil.

$44⁹⁵

In Stock

Quantity:

+ −

5/32" .1563" Screw Machine Drill Bit

0.0

CODE:

C1-72

These are the same drills I use in the Rivet Drilling tool, drilling gas piston rivet holes and for drilling holes for the 4mm rivet holes in receivers. These are screw machine length drill bits with 135 degree split points to keep drill walk and bending to a minimum. The junk drills from...

$2⁹⁵

Quantity:

+ −

Rivet Head Drilling Tool

0.0

CODE:

B6-31

Rivet head drilling tool — heat-treated steel, includes 5/32" drill bit. Designed for removing trunnion rivets from AK parts kits.

$37⁹⁵

In Stock

Quantity:

+ −

.300" Barrel Pin Reamer

0.0

CODE:

A2-32

This is the same reamer we use to work with the .302 barrel pin holes. Drill the hole first with a 7mm drill then ream the hole. The reamer has more flutes than a drill and makes a more precise hole. Be sure the chuck on your drill has the least amount of wobble as possible to...

$39⁹⁵

Quantity:

+ −

Gas Port Drill Bit

0.0

CODE:

C7-21

These are the drill bits I use for drilling 7.62 gas ports. These will fit into the port and it will guide the drill. Just press the gas block on first. This works on the Romanian and AMD65 style (45 degree)gas blocks. The Bulgarian 74 gas port holes are smaller and need...

$9⁹⁵

In Stock

Quantity:

+ −

7mm Screw Machine Drill Bit

0.0

CODE:

C1-73

US Made by Precision Twist Drill Screw Machine - Drills Size: 0.2756 In., 7.00 mm Flute Length: 1-11/32, 34 mm Overall Length: 2-29/32, 74 mm Finish/Coating: Black Oxide Point Angle°: 135 Point Type: Split

$6²⁵

Quantity:

+ −

No reviews found