816-229-0804

Home/Drills and Taps/Front Sight-Gas Block Drill Bit for Virgin Parts Kits #32

Front Sight-Gas Block Drill Bit for Virgin Parts Kits #32

CODE:

C3-21

Write a review

$3⁶⁵

$4⁵⁰ -19%

+ −

Ask a question

Save 19%

FRONT SIGHT-GAS BLOCK DRILL BIT FOR VIRGIN PARTS KITS #32, C3-21

Description
Related Products
Reviews

We use these drill bits when populating virgin parts kits without a pre-drilled hole in the gas block and front sight block that have never been drilled before. Use this drill instead of the 3mm drill since it will have a tendency to oversize the hole compared to the #32 drill.

Made in USA
Drill Bit Size (Wire)   #32
Tool Material   High Speed Steel
Cutting Direction   Right Hand
Coating/Finish   Oxide
Drill Point Angle   135
Spiral Type   Regular
Flute Type   Spiral
Point Type   Split

5/32" .1563" Screw Machine Drill Bit

0.0

CODE:

C1-72

These are the same drills I use in the Rivet Drilling tool, drilling gas piston rivet holes and for drilling holes for the 4mm rivet holes in receivers. These are screw machine length drill bits with 135 degree split points to keep drill walk and bending to a minimum. The junk drills from...

$2⁹⁵

Quantity:

+ −

Gas Port Drill Bit

0.0

CODE:

C7-21

These are the drill bits I use for drilling 7.62 gas ports. These will fit into the port and it will guide the drill. Just press the gas block on first. This works on the Romanian and AMD65 style (45 degree)gas blocks. The Bulgarian 74 gas port holes are smaller and need...

$9⁹⁵

In Stock

Quantity:

+ −

AK-Builder AK Rivet Set

0.0

CODE:

A0-61

The new long rear trunnion rivets have a slightly shorter head and the cupped tool that supports the rivets will need to be sanded down to keep the tool from touching the receiver. Be sure to check this before installing the new black rivets. These have the correct swell...

Options:

AKM Fixed Stock AK74 Sidefolder AK74 Fixed Stock AKS Underfolder Yugo M92/M70 1mm Underfolder Yugo M70/M72 Fixed Stock Yugo M70 1.5mm Underfolder Bulgarian RPK 74 Chinese Mak 90 Korean Type 68 Underfolder (More +3)

OptionsAKM Fixed Stock

$9⁰⁰

In Stock

Quantity:

+ −

Add to Cart

Barrel Pin Drill Bit for Virgin Parts Kits .272"

0.0

CODE:

C7-63

We use these drill bits when populating virgin parts kits without a pre-drilled hole in the trunnion for the barrel pin. Tool Material High Speed Steel Cutting Direction Right Hand Coating/Finish Oxide Drill Point Angle ...

$5⁹⁵

Quantity:

+ −

Rivet Head Drilling Tool

0.0

CODE:

B6-31

Rivet head drilling tool — heat-treated steel, includes 5/32" drill bit. Designed for removing trunnion rivets from AK parts kits.

$37⁹⁵

In Stock

Quantity:

+ −

Angled view of two uncoated high-speed steel 5mm and 7mm reamers for AK receiver pins.

5mm & 7mm Reamer Set

0.0

CODE:

A2-31

5 mm and 7 mm reamer set for finishing AK hammer and trigger pin holes. Use slow speed with cutting oil.

$44⁹⁵

In Stock

Quantity:

+ −

No reviews found