816-229-0804

Home/AK-Build Tools/AKFST-10 Mini Beryl Elevation Tool

AKFST-10 Mini Beryl Elevation Tool

CODE:

C7-41

Write a review

$19⁵⁰

Out-of-stock

Ask a question

AKFST-10 MINI BERYL ELEVATION TOOL, C7-41

Description
Features
Related Products
Reviews

Elevation tool for Mini Beryl AK pistols.

The Mini Beryl is unique because the sight post is square which is why this special tool is required. The other end of the tool is made to help push pins out on the AK.

All steel, precision CNC machined, hardened, and zinc plated.

Made in the USA by Magna-Matic

Rivet Head Drilling Tool

0.0

CODE:

B6-31

Rivet head drilling tool — heat-treated steel, includes 5/32" drill bit. Designed for removing trunnion rivets from AK parts kits.

$37⁹⁵

In Stock

Quantity:

+ −

PSL Brass Barrel Press Puck

0.0

CODE:

R2-52

The PSL Brass Barrel Press Puck is used to press the PSL barrel out of the front trunnion. DO NOT use the other brass nut we sell for the other barrels we offer. Doing so will ruin the chamber end of the PSL barrel.

$9⁹⁵

Availability: Out-of-stock

AK-Builder black oxide AKM receiver drilling fixture kit, with included drill bits and supports.

AK-Builder Receiver Blank Drilling Fixture

0.0

CODE:

T2-11

AK-BUILDER Receiver Blank Drilling Fixture This tool is designed to be used with 80% AKM receivers with OR without rails and center supports installed. The bottom of the fixture is also setup to be used if your receiver has trigger humps or a reinforcement plate. The fixture is...

Type:

V-5 Standard or Underfolder-Sidefolder Plates V-4 For 1.5mm Receivers

TypeV-5 Standard or Underfolder-Sidefolder Plates

$139⁹⁵

In Stock

Quantity:

+ −

Add to Cart

AKM Trunnion Support Block

0.0

CODE:

C8-21

Support plate for pressing in or out your barrel pins on an AKM style trunnion. These are not specifically made for use with any of the bulged trunnion 1.5mm receivers. These are made from 6061 T6 aluminum then black anodized. Comes with three set screws for leveling the trunnion if...

$34⁹⁵

In Stock

Quantity:

+ −

Angled view of AK-Builder steel Rail Alignment Fixture showing front clamp and screw.

AK-Builder Rail Alignment Fixture

0.0

CODE:

C3-61

AK-Builder rail alignment fixture — positions and clamps lower bolt guide rails in stamped receivers for accurate welding and alignment.

$29⁹⁵

In Stock

Quantity:

+ −

AK Trunnion Rivet Hole Drilling Fixture

0.0

CODE:

T3-11

Here is a professional tool for drilling the front and rear trunnion holes in AK47 receivers. This tool will work with 7.62 and 5.45 trunnions using two different expanding mandrels that fit into the trunnion. The red mandrel fits the 7.62 and the blue fits the 5.45. The...

$99⁹⁵

In Stock

Quantity:

+ −

Add to Cart

No reviews found